Panasonic PT-AE2000E manual Flexible INSTALLATION, Easy Operation

FLEXIBLE INSTALLATION, EASY OPERATION

Versatile Input Interfaces

The PT-AE2000E has three HDMI input ter- minals for digital transmission without image degradation, and two component input terminals. The HDMI input terminals also support Deep Colour and xvYCC colour space of the new HDMI 1.3a standard.*4

ble to project a 120-inch picture from as close as 11´10˝ (3.6 m) to the screen or as far as 23´7˝ (7.2 m) away. In addition, the image can be shifted ±100% vertically, and ±40% horizontally. This gives you out- standing setup flexibility. If you choose to ceiling-mount the projector, you can zoom and focus by remote control.

Other Features

• Seven picture mode includes Cinema 1/2/3,

Normal, Dynamic, Colour 1/2.

• 3D noise reduction for high-precision noise

detection and reduction

• Scene-adaptive MPEG noise reduction

effectively blocks regular noise and min-

imises mosquito noise.

• Scene adaptive resizing LSI improves quali-

ty when resizing 480p images or those

	Learning Remote Control
	with Function Buttons
	The universal “learning”
	remote can be used to control
*4 Effective in Colour 1 image mode.	multiple devices in your home
2x Optical Power Zoom/Focus and	theatre. You can also assign
	direct shortcuts to functions
Wide Lens Shift Range	you frequently use on the
A 2x optical power zoom/focus lens and a	three function buttons.
lens shift function together make it possi-	Backlit buttons

from other sources with resolution lower

than the PT-AE2000E’s native resolution.

• 24p compatible

• Progressive cinema scan (3/2 pulldown)

and HD IP

• Selectable frame response

• Up to sixteen sets of adjustment settings

can be stored in memory with custom

names that make them easy to remember

• Built-in test pattern

		Shift range
100%
Projection
size
Standard position
100%
40%	Projection	40%
	size
Specifications

Easy Maintenance

For easier maintenance, you can replace the filter from the side and the lamp from the top. The dust filter and lamp are easily replaced even after the PT-AE2000E is installed on the ceiling.

• On-screen input guidance

• Auto input search

• Normal/economy lamp power selection

• Off-timer

• Lens-centred design

• Quiet operation: 22 dB (in Economy lamp

mode)

Image size/projection distance

Power supply	100–240 V AC, 50/60 Hz
Power consumption	240 W (Approx. 0.08 W in standby mode with fan stopped)
LCD panel*1
Panel size	0.74˝ (17.78 mm) diagonally
Aspect ratio	16:9 aspect ratio
Display method	Transparent LCD panel (x 3, R/G/B)
Drive method	Active matrix
Pixels	2,073,600 (1,920 x 1,080) x 3, total of 6,220,800 pixels
Lens	Powered zoom (2x)/powered focus, F 1.9 - 3.2, f 22.4 mm–44.8 mm
Lamp*2	165 W UHM™ lamp
Brightness*3	1,500 lumens*4
Contrast*3	16,000:1*4 (full on/full off)
YPBPR signal compatibility	480i (525i), 480p (525p), 576i (625i), 576p (625p), 720 (750)/50p, 720 (750)/60p, 1,080
	(1,125)/24p, 1,080 (1,125)/50i, 1,080 (1,125)/50p, 1,080 (1,125)/60i, 1,080 (1,125)/60p
Colour system	PAL, PAL-M, PAL-N, PAL 60, SECAM, NTSC, NTSC 4.43,
Optical axis shift*5	Horizontal ±40% and vertical ±100%
Keystone correction range	Vertical: approx. ±30°
Terminals
HDMI IN	HDMI connector x 3
COMPUTER IN	D-sub HD 15-pin (female) x 1
COMPONENT IN	RCA pin (Y, PB/CB, PR/CR) x 2
S-VIDEO IN	Mini DIN 4-pin x 1
VIDEO IN	RCA pin x 1
SERIAL	D-sub 9-pin x 1 (RS-232C based)
Dimensions*6 (W x H x D)	460 x 130 x 300 mm (18-1/8˝ x 5-1/8˝ x 11-25/32˝)
Weight	7.2 kg (15.9 lbs.)
Operating environment	Temperature: 0°–40°C (32°–104°F), Humidity: 20%–80% (no condensation)
Supplied accessories	Power cord, Wireless remote control unit, Batteries for remote control (AA type x 2)
Optional accessories
ET-LAE1000	Replacement lamp unit
ET-PKE2000	Ceiling mount bracket for high ceilings
ET-PKE1000S	Ceiling mount bracket for low ceilings
ET-PCE2000	Cable cover

Projection size (16:9)		Projection distance (L)
Diagonal length		Min (Wide)		Max (Telephoto)
1.01 m / 40˝	1.2 m /		3´11˝	2.3 m / 7´7˝
1.52 m / 60˝	1.8 m /		5´10˝	3.5 m / 11´6˝
2.03 m / 80˝	2.4 m /		7´10˝	4.7 m / 15´5˝
2.54 m /100˝	3.0 m /		10´2˝	6.0 m / 19´8˝
3.05 m /120˝	3.6 m /11´10˝			7.2 m / 23´7˝
3.81 m /150˝	4.5 m /		14´9˝	9.0 m / 29´6˝
5.08 m /200˝	6.0 m /		19´8˝	12.0 m / 39´4˝

L (LW/LT)

*1 The projector uses a type of liquid crystal panel that typically consists of millions of pixels. This panel is built with very high-precision tech- nology designed to provide one of the finest possible images.

Occasionally, a few pixels may remain turned on (bright) or turned off (dark). Please note that this is an intrinsic characteristic of the manu- facturing technology that affects all products using LCD technology.

*2 The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break, emitting a large sound, or fail to illuminate, due to impact or extended use. The length of time that it takes for the lamp to break or fail to illuminate varies greatly depending on individual lamp characteristics and usage conditions.

*3 Measurement, measuring conditions, and method of notation all com- ply with ISO 21118 international standards.

*4 In AI mode, with dynamic iris on.

*5 Shift range is limited during simultaneous horizontal and vertical shifting.

*6 Excluding protrusions

For detailed explanation of features please visit our Projector Global Web Site

http://panasonic.co.jp/pavc/global/projector

Please contact Panasonic or your dealer for a demonstration.

Weights and dimensions shown are approximate. Specifications are subject to change without notice.

This product may be subject to export control regulations. UHM is a trademark of Matsushita Electric Industrial Co.,

Ltd. VGA and XGA are trademarks of International Business Machines Corporation. HDMI, the HDMI logo and

High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

All other trademarks are the property of their respective trademark owners. Projection images simulated.

PT-AE2000E1-07SEP30K Printed in Japan.