Panasonic PT-AX100U manual Position Menu, DOT Clock, Clock Phase

POSITION Menu

See “Navigating through the MENU” on page 26.

H - POSITION

You can move the projected image horizontally for fine adjustment.

Move Move

left right

V - POSITION

You can move the projected image vertically for fine adjustment.

Move Move

down up

DOT CLOCK

If you have interference patterns on the projected image, which is sometimes referred to as moire or noise, you can minimize it by pressing IHto adjust the clock frequency.

NOTE:

If the projecting signal’s dot clock frequency is higher than 150 MHz, the adjustment may not make a difference.

CLOCK PHASE

If you require further adjustment for the same reason as the DOT CLOCK adjustment, you can fine adjust the timing of the clock. Press I H to adjust.

NOTE:

If the projecting signal’s dot clock frequency is higher than 150 MHz, the adjustment may not make a difference.

CLOCK PHASE is not available with 1 125 (1 080)/50i, 1 125 (1 080)/60i,

1 125 (1 080)/50p, 1 125 (1 080)/60p,

1 125 (1 080)/24p, 750 (720)/50p and

750 (720)/60p signals using the COMPONENT connection.

Settings

ENGLISH - 31