Panasonic PT-AX200U Temp and Lamp Indicators, Managing the indicated problems, Lamp indicator

TEMP and LAMP Indicators

Managing the indicated problems

If a problem should occur with the projector, the LAMP and/or TEMP
indicators will inform you. Manage the indicated problems as follow.
1.	Confirm the status of all indicators and projector, and switch off
	the projector in proper way.	POWER LAMP TEMP
2.	Find out the cause of the problem by status of the LAMP and/or
	TEMP indicators.
3.	Follow the following instruction for each indication and solve the
	problem.

4.Turn on the projector in the correct way and confirm the indicator is not indicating a problem any longer.

NOTE:

• If no problem is found or the problem remains, do not turn on the projector. Instead contact an Authorized Service Center.

LAMP indicator

Indicator	Illuminating red	Flashing red
Problem	LAMP RUNTIME has	The lamp circuit failure, abnormal function or lamp unit is damaged.
	reached 1 800 hours.
	The lamp unit will run	The MAIN POWER is
		switched on again	The lamp circuit failure,	The lamp unit is
Cause	out soon and needs to
		before the lamp unit is	abnormal function.	damaged.
	be replaced.	cooled enough.
	See “Replacing the	Let the lamp unit cool	Contact an Authorized	See “Replacing the
Remedy		down and turn on the
	lamp unit” on page 42.		Service Center.	lamp unit” on page 42.
		MAIN POWER.

TEMP indicator

Indicator	Illuminating red and still projecting
	Flashing red and the POWER button is turned off
Problem	The temperature inside and/or outside the projector is abnormally high.
Cause	The ventilation openings are	The room temperature is too	The air filter is excessively dirty
	covered.	high.	and the ventilation is poor.
	Remove the object(s) from the	Reinstall the projector in	Replace the air filter in the
Remedy	ventilation openings or clear	temperature controlled place.
			proper method. See page 41.
	around the projector.	See page 48.

Maintenance

40 - ENGLISH