Panasonic PT-D3500E manual Mail setup, Lamp Runtime remaining

E-mail setup page

With this projector, if a problem occurs or if the lamp usage time reaches a set value, an e-mail message can be sent to one or more preset e-mail addresses (maximum two addresses). Click [Projector Control], then [E-mail set up] to display the E-mail setup page.

	Select “Enable” to use	Enter the IP address or server name of the E-mail server (SMTP).
	the E-mail function.	The DNS server must be set if the server name is entered.
					Enter the E-mail address of the
					projector.
					(maximum 63 characters)
					The user can enter the location
					of, for example, the installed
					projector so that the recipient
					may easily identify the
					originator of the E-mail.
					(maximum 63 characters)
					The user can modify the
					minimum time interval of
					temperature warning mail. The
					default value is 60 minutes. In
					this case, the user cannot send
					another mail for 60 minutes
					after sending previous
					temperature warning mail even
The user can	modify the threshold temperature		Enter	the E-mail	the set warning temperature is
for sending temperature warning mail. If the			address of your		reached again.
temperature rises above the set value, control			desired recipient.
sends temperature warning mail.
					Select the conditions for
					sending E-mail.
					ERROR:
					an error is detected by self-
					diagnosis.
					LAMP RUNTIME: remaining
					lamp service time has reached
					the value set in the field.
					INPUT AIR TEMPERATURE:
					intake air temperature has
					reached the value set in the field.
					Periodic warning interval setting
					(e-mail is sent on the checked
					days of the week/times)
					(Continued on next page)

ENGLISH

51

Downloaded from www.Manualslib.com manuals search engine