Panasonic PT-D3500E - page 59

59

ENGLISH

Interface ports

RGB2 input terminal

Video input terminal

S-video input terminal

Serial input terminal

Remote1 input terminal

Remote2 terminal

DVI-D terminal

LAN terminal

Audio input terminal

Audio output terminal

1 set of high-density, D-sub 15p (female)

[For YPBPRinput]

Y: 1.0 V [p-p] synchronization signal included, PBPR: 0.7 V[p-p] 75 Ω

[For RGB input] 0.7 V[p-p] 75 ΩFor G-SYNC: 1.0 V[p-p] 75 Ω

HD/SYNC: TTL, high-impedance, positive/negative polarity

automatically adjusted

VD:

TTL, high-impedance, positive/negative polarity automatically adjusted

• However, HD/SYNC, and VD terminals are not compliant with 3-value

direct SYNC.

1 set RCA

1.0 V[p-p] 75 Ω

1 set Mini DIN 4p

Y 1.0 V[p-p] C 0.286 V[p-p] 75 ΩCompliant with S1 signals

D-sub 9-pin (female), RS232C compliant

Used for personal computer control

1 set for M3 stereo mini jack

Wired remote control

D-sub 9-pin (female)

Used for external control

DVI-D 24-pin

RJ-45 Compliant with PJLink™

1 set of M3 stereo mini jacks (L and R) for RGB1/RGB2/DVI input

1 set of RCA (L and R) for Video/ S-Video input

1 set of M3 stereo mini jacks (L and R)

Length of power supply cord 3.0 m

Cabinet Molded resin

Outside dimensions Width: 332 mm; Height : 168 mm; Depth: 425 mm

Mass 7.9 k

Working environment condition 3Ambient temperature: 0 °C to 40 °C

Ambient humidity: 20 % to 80 % (no condensation)

Remote control

Power source

Operation range

Mass

Outside dimensions

3 V DC (two AAA dry cells)

approx. 7 m (in front of beam receiver)

95 (including dry cells)

Width: 45 mm, Thickness: 23 mm, Depth: 145 mm

Option

Hanging attachment (For high ceiling) : ET-PKD35

Hanging attachment (For low ceiling) : ET-PKD35S

Projection lens : ET-DLE100, ET-DLE200, ET-DLE300, ET-DLE400, ET-DLE050

Wireless mouse receiver : ET-RMRC2

Replacement lamp unit : ET-LAD35 (single bulb)

Long life lamp unit : ET-LAD35L (single bulb)

• The outside dimensions do not include the lens and other protruding parts. See page 63 for further details.

3When using the projector at high altitudes (1 400 to 2 700 m), the upper limit for the ambient temperature drops

by 5 °C.

Downloaded from www.Manualslib.com manuals search engine

Contents

Main DLPTM Based Projector Commercial Use Operating Instructions Dear Panasonic Customer: IMPORTANT SAFETY NOTICE Page Contents Precautions with regard to safety WARNING Precautions with regard to safety Caution Accessories Precautions on handling Precautions on transport Precautions on installation Disposal Precautions on use Name and function of parts < When the operation mode selector is set to Projector > Remote control Name and function of parts <When the operation mode selector is set to Computer> Front and side of the projector Name and function of parts Rear and side view of the main unit Controls on upper panel Side-mounted connection terminals Using the remote control unit Loading dry cells 1.Open battery compartment lid. 2.Insert the dry cells. 3.Close the battery compartment lid. Using the remote control as a PC mouse Operation mode selector switch Setting projector ID number to remote control Using a wired remote control Using the remote control unit Installation Projection schemes Installation geometry Projection distances Connection Setup precautions Example of connecting with AV products Example of connecting with PCs Connection How to install and remove the projection lens (optional) How to install the projection lens How to remove the projection lens Projection Powering up the projector Making adjustment and selection Powering off the projector Direct power off function How to adjust the lens focus, lens zoom and lens up/down position movement (optical shift) Press the LENS button on the remote control or on the control panel of the main unit. Choose an item and adjust it using buttons. How to adjust the lens Caution How to adjust the lens position to the left or right Automatic adjustment (AUTO SETUP) Using the FREEZE function Still image Motion image Using the SHUTTER function Press the SHUTTER button of the remote control or the main unit. Using the digital zoom ( D.ZOOM +) function Downloaded from www.Manualslib.com manuals search engine E A A On-screen menus Structure of menu screens AUDIO (page 33) OPTION1 (page 34) LANGUAGE (page 33) Basic menu operations BRIGHT 32 Press the MENU button. Select (highlight) the desired item with the or buttons. Press the ENTER button to enter your selection. Adjusting the picture PICTURE MODE BRIGHT CONTRAST COLOR SHARPNESS NR AI TV-SYSTEM SYSTEM Adjusting the position POSITION ASPECT ZOOM CLOCK PHASE How to use ADVANCED MENU INPUT RESOLUTION DIGITAL CINEMA REALITY BLANKING CLAMP POS. Changing the display language Adjusting the audio VOLUME AUDIO MUTE OPTION1 settings COLOR CORRECTION CONTRAST MODE AUTO SIGNAL BACK COLOR OPTION2 settings ID FRONT/REAR DESK/CEILING LAMP POWER FAN CONTROL2 FUNC1 KEY ASSIGN AUTO POW.OFF PASSWORD Displaying the internal test pattern Cycle of displayed internal test patterns Black on white ground White on black ground Setting the security INPUT PASSWORD Setting the network Connecting the PC System requirements Operation is not guaranteed for all computers that meet the above conditions. Connection example Using the serial terminals Cable specifications Control commands Using the serial terminals Pin assignments and control Using the REMOTE 2 terminal Indication of lamp monitor Temperature monitor Lamp monitor Cleaning and replacement of air filter Procedure of cleaning Turn off the main power and remove the power plug from the receptacle. Dismantle the air filter. Set the air filter. Replacing the lamp unit Precautions on lamp unit replacement Timing of lamp unit replacement Indication after 1 300 hours 2(with the lamp output set at HIGH) WARNING! Lamp unit replacement steps Caution Replacing the lamp unit Using Web Browser Control Accessing from the Web browser Password change page Basic control page Monitor information page Detail control page Error information page E-mail setup page DNS server set up page E-mail setup page (continuing) POP server setup page Ping test page Contents of mail sent Mail with the contents shown below is sent when the E-mail settings have been established. Downloaded from www.Manualslib.com manuals search engine Click [Network set up], then [Adjust clock] to display the Adjust clock page. Adjust clock page Network config page Network status page Using the PJLinkprotocol Supported commands PJLinksecurity authentication Before asking for service Specifications Page Compatible Signal List Projection distances by projection lens Calculation formulas for projection distance by lens types Dimensions Note: Trademark Acknowledgement Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households) For business users in the European Union Information on Disposal in other Countries outside the European Union