Panasonic PT-D6000LK, PT-D6000K, PT-D6000LS PT-D6000S/D6000K/D6000LS/D6000LK, Specifications

S P E C	F	I L E
DLP™ Projectors		PT-D6000S/D6000K/D6000LS/D6000LK
Specifications
Main Unit
Power supply:		North America:	120 V AC, 50/60 Hz
		Europe:	220–240 V AC, 50/60 Hz
Power consumption:		North America:	780 W (780 VA) (Standby mode eco* 1 : 0.2 W, Standby mode normal:
			8 W. Both with fan stopped.)
		Europe:	750 W (840 VA) (Standby mode eco* 1 : 0.3 W, Standby mode normal:
			9 W. Both with fan stopped.)
DLP™ chip:		Panel size:	0.7˝ diagonal (4:3 aspect ratio)
		Display method:	DLP™ chip x 1, DLP™ system
		Pixels:	786,432 (1,024 x 768) x 1, total of 786,432 pixels
Lens:		PT-D6000S/D6000K:	Powered zoom/focus lenses (1.8– 2.4:1), F 1.7– 2.0, f 25.6–33.8 mm
		PT-D6000LS/D6000LK:	Optional poweredzoom/focus lenses
Lamp:			300 W UHM lamps (x 2) (dual lamp system)
Screen size:			50– 600 inches (50–200 inches with the ET-DLE055), 4:3 aspect ratio
Brightness* 2 :			6,500 lumens (dual lamp, high power mode)
Center-to-corner uniformity* 2 :			90%
Contrast* 2 :			2,000:1 (full on/full off, contrast mode: high, brightness: 3,250 lumens)
			1,000:1 (full on/full off, contrast mode: normal)
Resolution:			1,024 x 768 pixels (Input signals that exceed this resolution will be
			converted to 1,024 x 768 pixels.)
Scanning frequency:		DVI-D:	Horizontal: 15–91 kHz, Vertical: 50– 85 Hz,Dot clock: 162 MHz or lower
		RGB:	Horizontal: 15–91 kHz, Vertical: 50– 85 Hz,Dot clock: 150 MHz or lower
		YPBPR (YCBCR):	525i (480i): fH 15.75 kHz; fV 60 Hz,
			625i (576i): fH 15.63 kHz; fV 50 Hz,
			525p (480p): fH 31.50 kHz; fV 60 Hz,
			625p (576p): fH 31.25 kHz; fV 50 Hz,
			750 (720)/60p: fH 45.00 kHz; fV 60 Hz,
			750 (720)/50p: fH 37.50 kHz; fV 50 Hz,
			1035/60i: fH 33.75 kHz; fV 60 Hz,
			1125 (1080)/60i: fH 33.75 kHz; fV 60 Hz,
			1125 (1080)/50i: fH 28.13 kHz; fV 50 Hz,
			1080/25p: fH 28.13 kHz; fV 25 Hz,
			1080/24p: fH 27.00 kHz; fV 24 Hz
			1080/24sF: fH 27.00 kHz; fV 48 Hz,
			1080/30p: fH 33.75 kHz; fV 30 Hz
			1080/60p: fH 67.50 kHz; fV 60 Hz,
			1080/50p: fH 56.25 kHz; fV 50 Hz
		S-Video/Video:	Horizontal: 15.75/15.63 kHz, Vertical: 50/60 Hz,
			(NTSC, NTSC4.43, PAL, PAL60, PAL-N, PAL-M, SECAM)
Optical axis shift:			Vertical: +50% (powered), horizontal: ±10% (powered)
Keystone correction range:			Vertical: ±40° (±30° with the ET-DLE055)
Installation:			Ceiling/floor, front/rear
Terminals * 3 :		DVI-D IN:	DVI-D 24-pin x 1, DVI 1.0 compliant, HDCP compatible, for single link
			only
			480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p,
			1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p,
			VGA (640 x 480) – WUXGA* 4 (1,920 x 1,200), compatible with non-
			interlaced signals only, dot clock: 25–162 MHz
		RGB 1 IN:	BNC x 5
		R, G, B:	R: 0.7 Vp-p, 75 ohms,
			G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
			B: 0.7 Vp-p, 75 ohms
			HD/VD, SYNC: High impedance, TTL (positive/negative), 75 ohms
		Y, PB, PR:	Y: 1.0 Vp-p (including sync signal), PB/PR: 0.7 Vp-p, 75 ohms
			NOTE: HD/SYNC, and VD terminals do not accept tri-level sync signals.

As of February 2009 < 2 >