Panasonic PT-D6000K, PT-D6000LS, PT-D6000LK DLP Projectors PT-D6000S/D6000K/D6000LS/D6000LK

S P E C F I L E

DLP™ Projectors PT-D6000S/D6000K/D6000LS/D6000LK

RGB 2 IN:	D-sub HD 15-pin x 1
R, G, B:	R: 0.7	Vp-p,	75	ohms,
	G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
	B: 0.7	Vp-p,	75	ohms

HD/VD, SYNC: High impedance, TTL (positive/negative), 75 ohms

NOTE: HD/SYNC, and VD terminals do not accept tri-level sync signals.

Y, PB, PR:

VIDEO IN:

S-VIDEO IN:

SERIAL IN:

SERIAL OUT:

REMOTE 1 IN:

REMOTE 1 OUT:

REMOTE 2 IN:

LAN:

Power cord length: Cabinet materials:

Dimensions (W x H x D): PT-D6000S/D6000K:

PT-D6000LS/D6000LK:

Weight:PT-D6000S/D6000K: PT-D6000LS/D6000LK:

Operating temperature: Operating humidity:

Supplied Accessories

Optional Accessories

Zoom lens (1.3 – 2.0:1)

Zoom lens (2.4 – 3.7:1)

Zoom lens (3.7– 5.6:1)

Zoom lens (5.5– 8.9:1)

Fixed-focus lens (0.8:1)

Ceiling mount bracket:

Y:1.0 Vp-p (including sync signal), PB/PR: 0.7 Vp-p, 75 ohms BNC x 1, 1.0 Vp-p, 75 ohms

Mini DIN 4-pin x 1, Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms D-sub 9-pin x 1 (RS-232C compliant) for external controller D-sub 9-pin x 1 for link control

M3 jack x 1 for wired remote control

M3 jack x 1 for link control

D-sub 9-pin x 1 for external control (parallel)

RJ-45 x 1 for network connection, 10Base-T/100Base-TX, compliant with PJLink™

3.0 m (9´10˝) Molded plastic

498 mm x 175 mm* 4 x 440 mm* 5 (19-19/32˝ x 6-7/8˝ * 4 x 17-5/16˝ * 5 ) (with supplied lens)

498 mm x 175 mm* 4 x 432 mm (19-19/32˝ x 6-7/8˝ * 4 x 17˝) (without lens)

Approx. 16.0 kg (35.3 lbs)(with supplied lens) Approx. 15.2 kg (33.5 lbs)(without lens) 0°–45°C (32°–113°F)

20%– 80% (no condensation)

Power cord, Wireless/wired remote control unit, Batteries for remote control (x 2), Wire rope

ET-DLE150

ET-DLE250

ET-DLE350

ET-DLE450

ET-DLE055

ET-PKD56H (for high ceilings)

ET-PKD55S (for low ceilings)

Weights and dimensions shown are approximate. Specifications subject to change without notice.

*1 In Standby mode eco, LAN-based network functions such as the standby ON function will not operate.

*2 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. *3 The HD/SYNC and VD inputs do not accept the tri-level sync signal.

*4 With legs at shortest position.

*5 Including the supplied lens.

As of February 2009 < 3 >