S P E C F

I L E

DLPProjectors

PT-DW6300S/DW6300K/DW6300LS/DW6300LK

Notes on Projector Placement and Operation

The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the following precautions.

1.Never place objects on top of the projector while it is operating.

2.Make sure there is an unobstructed space of 500 mm or more around the projector’s exhaust openings.

3.Do not stack projector units directly on top of one another. If two units must be stacked for back- up use in ordinary projection, use a method as shown below and provide ample space between the units to ensure that exhaust heat does not accumulate near the intake opening or around the units. Dual stacked projection is not recommended.

4.If the projector is placed in a box or enclosure, ensure the temperature of the air surrounding the projector is between 0°C/32°F and 40°C/104°F *. Also make sure the projector’s intake and exhaust openings are not blocked. Take particular care to ensure that hot air from the exhaust openings is not sucked into the intake openings.

*Even when the ambient temperature near the intake opening is 40°C/104°F or lower, an accumulation of hot air inside the cabinet may cause the protective circuit to activate and shut down the projector. Please give ample consideration to the design with regard to ambient temperature conditions.

500 mm/19.2˝ or more

100 mm/

3.9˝ or more

500 mm/19.2˝

500 mm/19.2˝

or more*

or more*

Do not stack projector units directly on top of one another.

Direction of Air Intake and Exhaust

Intake

Exhaust

Operating the Projector Continuously

1.If the projector is to be operated continuously 24 hours a day, use the dual-lamp optical system’s alter- nating lamp operation (lamp changer) function. The projector cannot be operated continuously 24 hours a day in dual-lamp mode.

Allow a minimum of two hours per day of non-operation time.

2.The lamp replacement cycle duration becomes shorter if the projector is operated repeatedly for short periods.

DLP and the DLP logo are trademarks of Texas Instruments.

PJLink is a registered trademark, or a trademark application has been filed, in Japan, the United States, and other countries and regions. All other trademarks are the property of their respective trademark owners.

As of February 2009

 

< 14 >

Page 14
Image 14
Panasonic DW6300K, PT-DW6300LS, PT-DW6300S Direction of Air Intake and Exhaust, Operating the Projector Continuously

DW6300K, PT-DW6300S, PT-DW6300LS, DW6300LK specifications

Panasonic has long been a leader in the projection technology field, and their DW6300 series solidifies this reputation through its innovative features and robust performance. The models within this series—namely the Panasonic DW6300LK, PT-DW6300LS, PT-DW6300S, and DW6300K—cater to a variety of professional and commercial environments, ensuring bright, clear images suitable for any audience.

One of the standout features of the DW6300 series is its versatility with interchangeable lenses. Users can easily adapt each model to meet the specific needs of different installation environments, whether it be a large auditorium or a small conference room. Each projector supports a broad lens shift range, which greatly simplifies alignment and installation—even in challenging setups.

Panasonic incorporates advanced imaging technology in the DW6300 series, utilizing a 3LCD system that delivers excellent color accuracy and brightness. With a native resolution of WUXGA (1920 x 1200), these projectors produce sharp images with a high dynamic contrast ratio, allowing for vibrant presentations that capture the audience's attention.

Another significant characteristic of these projectors is their high lumen output, which ranges from 5500 to over 6000 lumens depending on the model. This powerful brightness enables them to perform exceptionally well in environments with ambient light, ensuring that presentations remain visible and impactful without requiring complete darkness.

The DW6300 series also features an advanced cooling system, which allows for extended operational hours without overheating. This aspect is crucial for businesses that require continuous projection throughout the day, ensuring reliability during critical presentations or events.

Connectivity options are comprehensive, with HDMI, DVI-D, and various other inputs that allow for versatility in display sources. This compatibility makes it easy to integrate with existing AV systems, reducing the need for additional adapters and simplifying the user experience.

In terms of control and management, the DW6300 series supports network functionality, allowing for remote monitoring and management. Users can easily access projector settings over a network, making it convenient to handle multiple units in larger venues or installations.

In summary, the Panasonic DW6300LK, PT-DW6300LS, PT-DW6300S, and DW6300K projectors excel through their bright performance, versatile lens options, and advanced connectivity features. They are tailor-made for professional settings, delivering reliable and high-quality projection to enhance any presentation or event.