Operation Basic
Using the remote control
Note
zzThe signal displayed for the <INPUT 3> button and the <INPUT 4> button changes depending on the type of input module inserted.
zzPressing the <INPUT> button on the control panel changes the signal in the order of [Input 1] → [Input 2] → [Input 3] → [Input 4].
Correcting the keystone effect
You can correct the keystone effect that occurs when the projector is installed with tilt or when the screen is tilted.
zzThe amount and range of the correction differ depending on the input signal.
zzWith certain settings, the image may distort for a moment.
zzTo achieve the corrected image, the signal undergoes digital compression before projection and lines and text may be altered slightly from those of the original image.
zzFor details on the correction, refer to [Keystone] in the [Screen] menu.
button
1) Press the <KEYSTONE> button on the remote control.
zzEach press of the button switches the display between the standard keystone effect correction display and the corner correction display.
■■Standard keystone effect correction
Corrects the keystone effect vertically and horizontally.
1)While [Keystone] is displayed, press ▲▼◀▶ of the direction in which you want to make the correction.
Note
zzPressing the <KEYSTONE> button on the remote control for at least three seconds while [Keystone] is displayed returns the image to the uncorrected state.
■■Corner correction
Corrects distortion at the corners of the image.
1)While [Keystone] is displayed, press the <ENTER> button and select the
corner to correct.
zzEach press of the button moves the selected corner clockwise.
2)Press ▲▼◀▶ to correct the distortion.
Note
zzPressing the <KEYSTONE> button on the remote control for at least three seconds while [Keystone] is displayed returns the image to the uncorrected state.
Selecting picture quality mode
Pressing the <IMAGE SELECT> button on the remote control displays the menu for the currently selected [Image select], then each subsequent press of the button changes the mode.
button
For computer input |
| For video input |
[Standard] |
| [Standard] |
|
|
|
[Real] |
| [Cinema] |
|
|
|
[Dynamic] |
| [Dynamic] |
|
|
|
[Image 1] - [Image 10] |
| [Image 1] - [Image 10] |
Note
zzFor details, refer to “[Image select] menu” ( page 59).
48 - ENGLISH