Projecting
■■Adjusting the focus and zoom
1) Press the <FOCUS> button and the <ZOOM> button on the remote control or the control panel.
zz[Focus] and [Zoom] are displayed on the screen for four seconds.
2)While [Focus] and [Zoom] are displayed, press the <FOCUS> button and <ZOOM> button on the remote control or press ▲▼ on the control panel to adjust the focus and zoom.
Note
zzWhen [Display] is set to [Off], the adjustment screen will not appear.
zzIt is recommended that the images are projected continuously for at least 30 minutes before the focus is adjusted.
zzIf the keystone effect occurs, refer to “Correcting the keystone effect” ( page 48) for details.
Operation Basic
46 - ENGLISH