Using the remote control Using the remote control

Using the shutter function

You can fully block the projection light.

button

1) Press the <SHUTTER> button on the remote control.

zzThis blocks the projection light. The shutter indicator <SHUTTER> lights up in blue.

2) Press the <SHUTTER> button again.

zzThis opens the shutter and restarts projection. The shutter indicator <SHUTTER> goes off.

Note

zzThe operations of the shutter differ depending on the settings. Set the operations using [Shutter] in the [Setting] menu.

zzThere is also the <SHUTTER> button on the control panel.

zzIf an error message appears when you press the <SHUTTER> button, the button lock is enabled. Check the [Shutter] setting from the [Setting] menu.

Using the freeze function

You can temporarily freeze the projected image regardless of the state of playback in an external device.

button

1) Press the <FREEZE> button on the remote control.

zzThis freezes the image.

2) Press the button on the remote control or the control panel.

zzReleases the frozen image.

Switching the input signal

You can switch the input signal for projection.

button

1) Press the <INPUT 1> - <INPUT 4> buttons on the remote control.

zzEach press of the button changes input signal. zzThe <INPUT 3> button and the <INPUT 4>

button are enabled only when an input module is inserted.

<INPUT 1> button

 

<INPUT 2> button

[RGB(PC analog)]

 

[RGB]

 

 

 

[RGB(Scart)]

 

[Y, Pb/Cb, Pr/Cr]

 

 

 

[RGB(PC digital)]

 

[Video]

Basic Operation

[RGB(AV HDCP)]

 

[S-video]

[HDMI]

ENGLISH - 47