Settings
[Screen] menu
[Custom]
Deletes the values registered in [Custom adj.]. zzWhen there is no input signal, [Custom] can be
selected but the image will be projected in [Normal] mode.
1)Press ▲▼ to select [Custom].
2)Press the <ENTER> button.
[Custom adj.]
Adjusts the horizontal and vertical scale and position. zzWhen there is no input signal, this item is grayed
out and cannot be selected.
zzIf the input signal is lost during adjustment, the adjustment value is stored and the [Aspect] adjustment screen is cleared.
1) Press ▲▼ to select [Custom adj.], and press the <ENTER> button.
zzThe sub menu 2 ([Aspect] adjustment screen) is displayed.
2) Press ▲▼ to select an item, and press the <ENTER> button.
zzThe adjustment screen is displayed.
zzTo adjust [H&V], press the <ENTER> button and adjust on the sub menu 2 screen.
zzPress the <ENTER> button for [Common] and [Reset]. Select [Yes] and press the <ENTER> button.
zzWhile the adjustment screen is displayed, press ▲▼ to display menus other than [H&V], [Common], and [Reset] in order.
3) Press ◀▶ to adjust the setting.
zzPress the <ENTER> button to return to the sub menu.
[Scale H] | Adjusts the horizontal scale. | |
[Scale V] | Adjusts the vertical scale. | |
| When adjusting the vertical and | |
| horizontal scale, select [On] to link | |
| the vertical and horizontal scales | |
[H&V] | and preserve the aspect ratio of the | |
image. | ||
| ||
| zzAs you adjust the numerical value | |
| of [Scale H], the numerical value | |
| of [Scale V] changes accordingly. | |
[Position H] | Adjusts the horizontal shift. | |
[Position V] | Adjusts the vertical shift. | |
[Common] | Applies the adjusted content to all | |
inputs. | ||
| ||
[Reset] | Resets all the adjusted content. |
[Digital zoom +]
This mode can only be adjusted for computer inputs.
1)Press ▲▼ to select [Digital zoom +].
2)Press the <ENTER> button.
zzThe menu screen is cleared and [D. zoom +] is displayed.
3) Press the <ENTER> button.
zzEach press of the button enlarges the image. zzPress ▲▼◀▶ to move the image.
zzThe image move function only works when the image size is larger than the panel resolution*1
*1: The panel resolution of the projector is 1 024 x 768 dots.
Note
zzWhen there is no input signal, [Digital zoom +] is grayed out and cannot be selected.
zzWhen [True] is selected, [Digital zoom +] cannot be selected.
zzTo end the [Digital zoom +] operation, press any
button other than the <D.ZOOM>, <ENTER>, and ▲▼◀▶ buttons.
66 - ENGLISH