[Digital zoom -]

This mode can only be adjusted for computer inputs.

1)Press ▲▼ to select [Digital zoom -].

2)Press the <ENTER> button.

zzThe menu screen is cleared and [D. zoom -] is displayed.

3) Press the <ENTER> button.

zzEach press of the button reduces the image. zzPress ▲▼◀▶ to move the image.

zzThe image move function only works when the image size is larger than the panel resolution*1

*1: The panel resolution of the projector is 1 024 x 768 dots.

Note

zzWhen there is no input signal, [Digital zoom -] is grayed out and cannot be selected.

zzWhen [True] is selected, [Digital zoom -] cannot be selected.

zzWhen [Custom] is selected, you cannot set [Digital zoom -] to [Normal] or smaller.

zzWhen [Store] registered in the [PC adjust] menu is selected in [System] of the [Input] menu, the image move function of [Digital zoom -] may not work correctly.

zzWhen VGA, SVGA, SXGA, WXGA, or UXGA is selected in [System] of the [Input] menu and the upward [Keystone] adjustment is at the maximum value, [Digital zoom -] may not work correctly.

zzTo end the [Digital zoom -] operation, press any

button other than the <D.ZOOM>, <ENTER>, and ▲▼◀▶ buttons.

[Screen] menu

[Keystone]

1)Press ▲▼ to select [Keystone].

2)Press the <ENTER> button.

zzThe sub menu 2 is displayed.

3) Press ▲▼ to select.

■■[Standard]

Corrects the keystone effect vertically and horizontally.

1) Select [Standard], and press the <ENTER> button.

zzThe menu screen is cleared and [Keystone] is displayed.

Keystone

2) Press ▲▼◀▶ to correct the corner.

■■[Corner correction]

Corrects distortion at the corners of the image.

1) Select [Corner correction], and press the <ENTER> button.

zzThe screen to select the corner to correct is displayed.

2)Press the <ENTER> button to select the corner to correct.

Keystone

Keystone

<ENTER>

button

Keystone

Keystone

3) Press ▲▼◀▶ to correct the corner.

Settings

ENGLISH - 67