Settings
[Screen] menu
■■[Corner pattern]
Selects the corner pattern mode displayed during corner correction.
1)Select [Corner pattern], and press the <ENTER> button.
2)Press ▲▼ to select.
[Red] Displays the corner pattern in red.
[White] Displays the corner pattern in white.
[Blue] Displays the corner pattern in blue.
[Off] Clears display of corner pattern.
■■[Store]
Stores the correction state.
1)Select [Store], and press the <ENTER> button.
2)Press ▲▼ to select an item, and press the <ENTER> button.
[Store] | The adjustment state remains in | |
memory even after removing the | ||
| power cord. | |
[Reset] | The adjustment state is reset when | |
the power cord is removed. | ||
|
zzYou can register only one of [Standard] and [Corner correction].
[Ceiling]
Sets the projection method in accordance with the installation status of the projector.
If the screen display is upside down, select [On]. zzThis setting is used when the projector is
installed using the ceiling mount bracket (optional accessory).
1)Press ▲▼ to select [Ceiling].
2)Press the <ENTER> button.
3)Press ▲▼ to select.
[Off][On]
[Rear]
Sets the projection method in accordance with the installation status of the projector.
If the screen display has flipped, select [On].
1)Press ▲▼ to select [Rear].
2)Press the <ENTER> button.
3)Press ▲▼ to select.
[Off][On]
[Reset]
The setting returns to its value before adjustment.
1)Press ▲▼ to select [Reset].
2)Press the <ENTER> button.
3)Select [Yes], and press the <ENTER>
button.
zzThe setting returns to its value before adjustment.
zzSelect [No] and press the <ENTER> button to return to the sub menu.
68 - ENGLISH