Panasonic PT-EX16K manual Ping test

Models: PT-EX16K

1 27

Page 18

This page makes it possible to check whether the network is connected to the e-mail server, POP server, DNS server, etc.

Click [Detailed set up], then [Ping test] to display the Ping test page.

Display which appears when the connection was successful.

Display which appears when the connection failed.

1Enter the IP address of the server to be tested.

2Button for conducting the test.

Image 18

Contents

Operating Instructions Contents What you can do Command controlRequest Regarding Security WEB control SeeCheck your computer  Wired LAN Check 1 For LAN cableComputer without a built-in wired LAN function Necessary environment for computers to be connectedDisplaying the Network menu Press the Menu button on remote controlNetwork menu Press the Select buttonProjector name Press to select Projector name, and press Select buttonDefault gateway  Network setup Default wired LAN settings IP address Network control Network status Connecting with Wired LAN Network factory defaultComputer operation Using Web Browser Accessing from the Web browserUsing Web Browser Projector statusError information Parameter DescriptionBasic control Detail control Change Password  Administrator mode  User account  User modeNetwork config Complete the detailed settings and click NextClick Submit Ping test Mail setup LAMP1-4 RuntimeAuthentication set up Lamp 1-4 RuntimeContents of mail sent Command port set up Command Control details Control commandsPJLink security authorization PJLink protocolControl commands via LAN Command transmission methodThere is a response from the projector Response data Data section Blank Mode Termination symbol Receive data Error message Termination symbolGlossary TrademarksDescriptions See ヱㄏㄔㄐㄏㄊチヤㄐㄓㄑㄐㄓㄕㄊㄐㄏ