Panasonic PT-L711XNTU manual Lock Setup

LOCK SETUP

The LOCK SETUP setting is automatically changed to ON after the SETUP function has been used, in order to prevent accidental changes from being made to the LAN settings.

When LOCK SETUP is ON, the SETUP function cannot be used. Before using the SETUP function, you need to change the LOCK SETUP setting to OFF.

Use the F or G button to select “LOCK SETUP”, and then press the I or H button to change the setting.

	L A N		S E T U P
S T A T U S				L A N 1
L O C K S E T U P				O F F	O N
S E T U P
S E L C T		A D J		E S C

SETUP

In order to make it easier to configure the projector’s network settings, the SETUP function displays the following setting screens in order from # to -.

Before using the SETUP function, use the “SELECT SETUP” menu to select the LAN settings that you would like to make or change. Also check that “LOCK SETUP” is OFF.

Use the F or G button on the projector or remote control unit to select “SELECT SETUP”, and then press the ENTER button to start making the settings.

	L A N		S E T U P
S T A T U S				L A N 1
L O C K S E T U P				O F F	O N
S E T U P
S E L C T		E N T E R		E S C

Note:

•When the final settings are made, “WAIT A MINUTE” appears briefly, and then the LAN is reset.

•If you press the MENU button at any time before the final settings have been made, all setting changes will be discarded and the previous settings will be restored.

#	SELECT		S E T U P
	The projector can store up to five	S E L E C T
		L A N	1
	different types of LAN settings.
L A N		2
	This is useful when using the
		L A N	3
	projector in different places with
	different network environments.	L A N	4
	Use the I or H button to select
	the desired type of setting and then	L A N	5
	press the [ENTER] button.
-23-