| LAMP indicator |
| ||
|
|
|
| |
Indicator | Illuminated (red) | Flashing (red) | ||
display | ||||
|
|
| ||
|
|
|
| |
| It is nearly time to | An abnormality has been detected in the lamp | ||
Problem | replace the lamp | circuit. |
| |
| unit. |
|
| |
|
|
|
| |
| BDoes “REPLACE | BThe power may | BThere may be an | |
Possible | LAMP” appear on | have been turned | abnormality in the | |
the screen after | on straight away | lamp circuit. | ||
cause | ||||
the projector is | after it was turned |
| ||
|
| |||
| turned on? | off. |
| |
|
|
|
| |
| BThis occurs when | BWait for a while | BDisconnect the | |
| the operation time | until the lamp unit | mains lead by | |
| for the lamp unit is | cools down before | following the | |
| nearing 1 800 | turning the power | procedure on | |
| hours (when | back on again. | page 26, and then | |
| “LAMP POWER” |
| contact an | |
Remedy | has been set to |
| Authorised | |
“HIGH” and when |
| Service Centre. | ||
|
| |||
| “AI” has been set |
|
| |
| to “OFF”). Ask |
|
| |
| your dealer or an |
|
| |
| Authorised |
|
| |
| Service Centre to |
|
| |
| replace the lamp |
|
| |
| unit. (page 55) |
|
| |
NOTE:
BBe sure to disconnect the mains lead by following the procedure given in “Turning off the power” on page 26 before carrying out any of the procedures in the “Remedy” column.
BIf the TEMP indicator is illuminated and the power turns off after the procedures in the “Remedy” column have been carried out, it means an abnormality has occurred. Please contact an Authorised Service Centre so that the necessary repairs can be made.
Care and maintenance
