Panasonic PT-LB60NTU, PT-LB60U manual Cleaning and maintenance

Problem	Possible cause	Page
The picture does	B The signal format (“TV-SYSTEM”) may not be set	43
not display	correctly.
correctly.	B There may be a problem with the video tape or	–
	other signal source.	68
	B A signal which is not compatible with the projector
	may be being input.
Picture from	B The cable may be too long.	–
computer does	B The external video output for the laptop computer	69
not appear.	may not be set correctly.
	(The actual method varies depending on the type
	of computer, so refer to the documentation
	provided with your computer for further details.)
	B If an PC INPUT indicator is turned off, the video	14
	signals may not be output from the computer.
	B “PC2 SELECT” in the “OPTION” menu is set to	50
	“OUTPUT” when the signals are input to PC 2
	IN/PC 1 OUT connector.

Cleaning and maintenance

Before carrying out cleaning and maintenance, be sure to disconnect the power cord plug from the wall outlet.

Wipe the cabinet with a soft, dry cloth.

If the cabinet is particularly dirty, soak the cloth in water with a small amount of neutral detergent in it, squeeze the cloth very well, and then wipe the cabinet. After cleaning, wipe the cabinet dry with a dry cloth. If using a chemically-treated cloth, read the instructions supplied with the cloth before use.

Do not wipe the lens with a cloth that is dusty or which produces lint. If any dust or lint gets onto the lens, such dust or lint will be magnified and projected onto the screen. Use a blower to clean any dust and lint from the lens surface, or use a soft cloth to wipe off any dust or lint.

64-ENGLISH