Before Requesting Service
If you have a problem with your Digital Camera, it may be something you can correct yourself.
Check the list below for symptoms and corrections.
Symptom | Solution |
|
|
No power | • Alkaline Battery is worn out. (p. 14) |
| • Make sure polarities are aligned properly. (p. 14) |
|
|
Power shuts off automatically. | • Alkaline Battery is worn out. (p. 14) |
| • The camera will go to Stand By mode. |
| Press STAND BY, or set the POWER to off |
| and then set to REC or MANUAL REC. (p. 22) |
|
|
Cannot capture the image. | • CompactFlash card is not inserted. (p. 16) |
| • Make sure the POWER switch is set to REC or |
| MANUAL REC. (p. 19) |
| • No memory. Delete some images before |
| capturing images. (p. 38) |
No Picture on the LCD | • LCD Viewfinder is OFF. (p. 13) |
Viewfinder | • The camera will go Stand By mode. |
| Press STAND BY, or set the POWER to off |
| and then set to REC or MANUAL REC. (p. 22) |
B/W picture on the LCD | • The REC mode is set to B/W mode. (p. 34) |
Viewfinder |
|
|
|
LCD Viewfinder image is too | • Make sure the LCD Viewfinder brightness |
bright or dark. | setting is adjusted properly. (p. 23) |
|
|
Indication or image on the | • Make sure the focus mode is properly set. |
LCD Viewfinder is not focused. | (p. 29) |
|
|
Flash will not light. | • The flash mode is set to (OFF) mode. |
| Change flash mode. (p. 30, 31) |
|
|
Cannot playback. | • CompactFlash card is not inserted. (p. 16) |
| • There are no images on the CF card.(p. 19 ~ 21) |
| • Make sure the POWER switch is set to PLAY. |
| (p. 24) |
|
|
No picture on the TV | • Make sure all necessary connections are correct |
(if connected). | and tight. (p. 28) |
| • Make sure the TV is set to video input mode. |
| (p. 28) |
|
|
Can not transfer images on the | • Make sure all necessary connections are correct |
PC Connection. | and tight. (p. 46~57) |
| • Make sure the PalmCam Driver is installed. |
| (p. 46, 52) |
| • Make sure the Camera is in PLAY. (p. 24) |
|
|
82 |
|
For assistance, call |
