Transferring Your Images (Windows 95/98)
Running the Application
1 Select Programs/PalmCam 2.0/ PalmCam 2.0 from the Start.
2 PalmCam Driver is opened.
Note :
To specify the PORT to which the Camera is connected. The commands in the COM Port Setup menu are used to change the COM Port or Baudrate. The application will communicate with the Camera using the set COM Port.
1 Select [Communication] from the [File], and the select [COM Port Setup...].
2 Select the Serial Port to connect with the Camera.
• The default setting is COM1.
• If you press “AUTO SETUP”, the Port to which the Camera is connected is detected and selected automatically.
3 Select the Baudrate with the Camera.
• The default setting is 38400bps.
• Depending on the PC being used, some baudrates may not have be available. Please refer to your PC manual.
Special Features
49
