MTS Broadcast / TV Stereo System

DISPLAY

AUDIO

Equipped with -TV Noise Reduction for true MTS

reproduction. -TV Noise Reduction is required for good

stereo separation and audio fidelity. is a registered

trademark, and is licensed by Technology Licensing.

Audio Mode for TV Viewing

1 Press AUDIO to select the desired audio mode as described above. (Arrow shows selection.)

Each press of AUDIO will change the audio mode as shown below.

“SAP” is selected with first press of AUDIO.

<Example >

12:00AM CH 08

STEREO

SAP

MONO

12:00AM CH 08

STEREO

SAP

MONO

12:00AM CH 08

STEREO

SAP

MONO

Receivable Broadcast Types

The following are possible audio broadcast types and on-screen displays. The signal being received is indicated with a “ ” mark while the selected audio mode is indicated with an arrow. To change the audio mode for these broadcasts, see the “Audio Mode for TV Viewing” section.

1 Press DISPLAY to display the broadcast signal being received.

MTS Stereo broadcast:

Multi-channel Television Sound Stereo broadcast. Select STEREO audio mode.

If stereo broadcast is weak and the display flickers, select MONO audio mode for possible improvement.

12:00AM CH 08

STEREO

SAP

MONO

SAP broadcast:

Secondary Audio Program (sub language).

Select SAP audio mode for the sub language.

12:00AM CH 08

STEREO

SAP

MONO

MTS Stereo and SAP broadcast:

Multi-channel Television Sound Stereo (main language) and Secondary Audio Program (sub language) broadcasts are being received simultaneously. Select the STEREO or SAP audio mode.

12:00AM CH 08

STEREO

SAP

MONO

MONO broadcast:

Normal monaural sound broadcast.

12:00AM CH 08

STEREO

SAP

MONO

18

 

For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at:http://www.panasonic.com/contactinfo

Page 18
Image 18
Panasonic PV-DF2035, PV DF2735 MTS Broadcast / TV Stereo System, Audio Mode for TV Viewing, Receivable Broadcast Types