5 If the image is not still clear, repeat Steps 1 to 4. (Do not use the Head Cleaner 3 times or more consecutively.)
Notes:
• Do not rewind every time you use the Head Cleaner. Rewind only when the tape reaches the end, and then use it again from the beginning in the same manner as before.
• If the heads become dirty soon after cleaning, the tape may be damaged. In this case, immediately stop using that Cassette.
• Do not clean the heads excessively. (Excessive cleaning may cause excessive wear of the heads. If the heads are worn, images cannot be played back even after the heads are cleaned.)
• If the dirty heads cannot be cleaned with the Head Cleaner, the Camcorder needs to be cleaned at a Servicenter. Please consult a dealer.
• Head cleaning due to dirty heads is not considered a malfunction of the product. It is not covered by the warranty.
Periodical Check-up
To maintain the highest image quality, we recommend replacement of worn parts, such as heads, etc., after approximately 1000 hours of use. (This, however, depends on operating conditions, such as temperature, humidity, dust, etc.)
Take out the Head Cleaner. Insert a Video Cassette and start recording. Then, play the tape back to check the recorded image.
4
„ Video Head Clogging and Care
If the heads (the parts that make contact with the tape) are dirty, mosaic-pattern noise may appear on the playback image, or the screen as a whole becomes black. If the heads are extremely dirty, recording performance deteriorates, and, in the worst case, the Camcorder cannot record at all.
Causes of Dirty Heads
• Large quantity of dust in the air
High-temperature and high-humidity environment
• Damaged tape
• Long operating hours
Using Panasonic cleaning cassette (AY-DVMCLA)
1 Set the Mode Dial to Tape
Playback Mode.
• The One-Touch Navigation icon is displayed on the lower right of the screen.
2 Insert the Head Cleaner into the Camcorder in the same manner as a Video Cassette.
3 Move the Joystick Control [Ÿ], and approximately 20 seconds later, move the Joystick Control [ź]. (Do not rewind the tape.)

Others

„Optimal Use of the Battery

Battery Characteristics

This Battery is a rechargeable lithium ion battery. Its ability to generate power is based upon the chemical reaction that takes place inside it. This reaction is susceptible to the surrounding temperature and humidity, and, if the temperature is too high or too low, the operating time of the Battery becomes shorter. If the Battery is used in an extremely cold environment, the Battery may operate only for about 5 minutes.

If the Battery becomes extremely hot, a protective function may operate, and the Battery may become unusable for a while.

Be Sure to Detach the Battery after Use

Be sure to detach the Battery from the Camcorder. (If it is left attached to the Camcorder, a minute amount of current is consumed even when the Camcorder power is off.) If the Battery is left attached to the Camcorder for a long time, over-discharge takes place. The Battery may become unusable after it is charged.

Disposing of an Unusable Battery

The Battery has a limited life.

Do not throw the Battery into fire because it may cause an explosion.

Always Keep the Terminals of the Battery Clean

Prevent the terminals from getting clogged with dirt, dust, or other substances. If you drop the Battery accidentally, check to see if the Battery body and terminals are deformed. Attaching a deformed Battery to the Camcorder or AC Adaptor may damage the Camcorder or AC Adaptor.

„Cautions for Storage

Before storing the Camcorder, take the

Cassette out and detach the Battery.

Store all the components in a dry place with a relatively stable temperature.

(Recommended Temperature: 59 °F to 77 °F (15 °C to

25 °C), Recommended Humidity: 40 % to 60 %)

Camcorder

Wrap it with a soft cloth to prevent dust from getting into the Camera.

Do not leave the Camcorder in places that expose it to high temperature.

Battery

Extremely high temperatures or low temperatures will shorten the life of the Battery.

If the Battery is kept in smoky or dusty places, the terminals may rust and cause malfunctions.

Do not allow the Battery terminals to come in contact with metal objects (such as necklaces, hairpins, etc.). This can result in a short circuit or heat generation and, if you touch the Battery in this condition, you may be badly burned.

Store the Battery in a completely discharged state. To store the Battery for a long period of time, we recommend you charge it once every year and store it again after you completely use up the charged capacity.

65

Page 65
Image 65
Panasonic PV-GS31, PV-GS35, PV-GS19 operating instructions „ Optimal Use of the Battery, „ Cautions for Storage

PV-GS19, PV-GS31, PV-GS35 specifications

The Panasonic PV-GS35, PV-GS31, and PV-GS19 are compact and versatile camcorders from the renowned Panasonic brand, designed to cater to the needs of budding videographers and seasoned enthusiasts alike. These camcorders are known for their portability, ease of use, and impressive features that enhance video quality and functionality.

The PV-GS35, the flagship model, boasts a 3 CCD image sensor system that offers superior color accuracy and better low-light performance. With a 12x optical zoom lens, users can capture distant subjects without sacrificing clarity. This camcorder supports a 21x digital zoom, expanding its capture capabilities. Additionally, it features a 2.5-inch LCD screen that tilts out for flexible shooting angles, allowing users to frame their shots with ease. The PV-GS35 also includes a digital image stabilizer that compensates for shaky hands, ensuring smooth and stable footage.

The PV-GS31 is a mid-range option that retains many of the robust features found in the GS35 but at a more affordable price. It also incorporates a 3 CCD system, ensuring vivid color reproduction and high-resolution video quality. The GS31 comes with a 10x optical zoom lens complemented by a 200x digital zoom feature, making it ideal for capturing both broad scenes and fine details. Its compact design makes it an excellent choice for on-the-go filming, and the convenient easy mode simplifies settings, making it accessible for novice users.

The Panasonic PV-GS19 is geared toward users who prioritize simplicity and portability while still seeking quality footage. Featuring a single CCD sensor, it doesn't reach the high-end capabilities of its counterparts but offers decent performance for casual shooting. The GS19 sports a 20x optical zoom and a digital zoom feature, perfect for capturing family moments and everyday activities. Its lightweight and compact design makes it an ideal choice for travel.

All three models are equipped with intelligent features such as face detection, various scene modes, and a built-in microphone. These camcorders utilize Panasonic's advanced optical technologies, enriching the overall shooting experience.

In conclusion, the Panasonic PV-GS35, PV-GS31, and PV-GS19 camcorders cater to varying levels of videography expertise and preferences, each providing distinctive features and technologies that allow users to capture memorable moments with remarkable quality. Whether for professional endeavors or less serious applications, these camcorders represent a versatile range of solutions tailored for diverse filming needs.