Panasonic PV-V4022-A warranty On-Screen Displays OSD, Function & Channel Displays

On-Screen Displays (OSD)

Function & Channel Displays

Warning and Instruction Displays

These displays will alert you to a missed operation or provide further instructions.

• On-Screen

CH 0 8

When a function button is pressed, e.g. PLAY, or you change channels, a 5 second display appears.

OSD	Caution	Page
PLEASE SET CLOCK BY	If you attempt to set or review a Timer	See page 6 of
PRESSING ACTION KEY	Recording and the Clock is not set...	Basic Operations
		book
TURN VCR OFF	After a Timer Program has been set...	See page 6 of
		Basic Operations
FOR TIMER RECORDING
		book

Displays (OSD) •

Blank Tape/No Video Signal Indications

When blank tape is detected during play, or the current channel has no signal (with Weak Signal Display feature (p. 10) set to OFF), the TV screen will turn solid blue.

VCR Status & Clock Displays

To display or remove overlay at right,

➛press DISPLAY*.

Current Time

Function Status

Rec Time Remaining	REC	12 : 0 0AM CH 02
	0 : 25	-0 : 12 : 34
(OTR mode only. See p. 5		SP
of Basic Operations book.)

Channel

Counter

Tape Speed (See p. 3 of Basic Operations book.)

CHECK CASSETTE	If you press REC on the remote	See page 3 of
	control or VCR, and a cassette is	Basic Operations
RECORD TAB
	inserted with no record tab...	book
NO CASSETTE	If you press PLAY, FF, REW, or REC	See page 5 of
	on the remote control or VCR without	Basic Operations
	a cassette inserted...	book
TO CANCEL TIMER REC	If you press POWER or STOP during	See page 6 of
PRESS POWER THEN	a Timer Recording...	Basic Operations
STOP KEY	(visible in VCR mode only)	book
VIDEO HEADS MAY
NEED CLEANING		See page 3 of
PLEASE INSERT HEAD	If head cleaning becomes necessary
		Basic Operations
CLEANING CASSETTE	while playing back a tape...
		book
OR REFER TO MANUAL
END :PLAY
VCR LOCK ACTIVATED	If you press a function button other
	than STOP/EJECT or POWER while	See page 10
	the VCR is in VCR Lock mode...
REMOTE CONTROL IS SET If you press an invalid key on the
TO TV MODE	remote while in TV mode...	See pages 2, 10
USE VCR : VCR KEY

*Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again.

Warning and Instruction Displays

- 4 - - 5 -