Panasonic PV-V4602 Advanced, Multi, Stereo, Brand, Control, System, Feature, Tape Operation

Confirm code entry,

3

Multi-Brand Control Feature

Multi-Brand Control Setup

The Remote Control can be set to control some TV and Cable box/DSS functions.

1 Find your TV and Cable Box/DSS Receiver Brand Code Number from those shown below.

2 Setup for TV control, ➛ hold down TV button,

➛ enter code with NUMBER keys.

Setup for Cable or DSS control, ➛ hold down DSS/CABLE button,

➛ enter code with number keys.

• If code number is 100 or greater,

➛ press 100 key, then other digits. E.g., press 100 - 0 - 2 for 102.

Advanced Connections

Audio/Video connection

If your TV has AUDIO IN and VIDEO IN terminals, you can connect your VCR to them to receive higher quality picture and sound.

• Advanced

MTS Broadcast/VHS Hi-Fi Stereo System

Connection

Make the Audio/Video Connection as shown on page 3.

• You can use a TV connected to Stereo amp and speakers instead of a Stereo TV.

Tape Operation

Search System

For each recording, an invisible index mark is placed on the tape. A program index and information are also included for timer recordings. These marks are used to access or scan recordings.

• MTS Broadcast

Timer Recording Using VCR Plus+ System

VCR Plus+ System is ...

This feature sets most items of a Timer Recording when you enter a PlusCode programming number found in TV GUIDE and selected newspaper TV listings.

Important Note

Timer Recording UsingVCR Plus+ System

Initial Setup.....

To use VCR Plus+ system, clock and channels must be set (p. 4 of “Basic Operations” book).

Channel Setup.....

Broadcast/ cable stations are assigned a VCR Plus+ (GUIDE CH) number. See the Channel

• Timer Recording

TV

Index Search

Program End Search

• “Connections/Initial Setup (Ready to Play)” on page 4 of “Basic Operations” book must be

completed before “Auto VCR Plus+ System Channel Setup” can be done. If any part of

Listing (directory) page of TV GUIDE, etc. In the Channel Setup below, you will be entering your

Equipped with ®-TV Noise Reduction for true MTS

1 SEARCH

Press SEARCH to

Locates end point of recording for continuity.

setup is incomplete, a warning screen appears.

local channel number (RECEIVE CH) for each GUIDE CH number.

Example : if NBC’s assigned GUIDE CH were 05, and your TV received NBC on channel 04, you

IN FROM ANT.

VCR

TV

VCR

AUDIO OUT

R

L

Stereo Amplifier

reproduction. ®-TV Noise Reduction is required for good stereo separation and audio

INDEX PROGRAM END

ENTER INDEX NUMBER :1 USING 1- 9 KEYS

FORWARD SEARCH :FF REVERSE SEARCH :REW NEXT :SEARCH

display SEARCH in Stop or Play mode, and then press NUMBER keys to select recording

1 Press SEARCH twice to display SEARCH in Stop or Play mode.

• VHS

Auto VCR Plus+ System Channel Setup (Part 1)

Auto VCR Plus+ System Channel Setup (Part 2)

would enter 04 across from GUIDE CH 05 in step 4 of “Manual VCR Plus+ System Channel Setup”.

Using

AUDIO OUT

Connections •

R

L

VHF/UHF

R

AUDIO IN

fidelity. ® is a registered

EXIT :STOP

number.

2		SEARCH		Press FF on the
	INDEX		PROGRAM END	remote to start

Hi

For [VCR ➛ TV] or [VCR ➛ cable box ➛ TV]

Before you perform the following steps, you

Manual VCR Plus+ System

VCR Plus+ System Programming

R	AUDIO IN
L	R
OUT TO TV	L

VHF/UHF

Multi-

L

OUT TO TV

trademark, and is licensed by ® Technology Licensing.

• To calculate number,

see below.

Press FF or REW on the remote to start

	PROGRAM END
SEARCH START :FF	SEARCH.
EXIT :SEARCH	• To cancel, press

-Fi

connection only.

In order for VCR to read PlusCode numbers, some set up is required. Guide channel numbers are assigned to each local broadcast and cable

should have:

• completed “Auto VCR Plus+ System

Channel Setup (Part 1)” on left.

• left VCR off overnight, and turned it back on

Channel Setup

For [VCR ➛ TV] or [VCR ➛ cable box ➛ TV] connection only.

1 Press PROG/VCR+ button to display PROGRAM.

2				Press	to select
	VCR Plus+	PROG.	LIST

VCR

VIDEO OUT

search.

STOP or PLAY.

Stereo

station. Because this number sometimes differs

after 9:00 AM the next day.

You’ll need a local TV channel listing (e.g. TV

ENTER PLUSCODE NUMBER display VCR Plus+

Plus+

•See table below for controllable functions in each mode.

Notes • Repeat setup after remote battery replacement.

Brand

Receivable Broadcast Types

2 INDEX SEARCH Play begins at search Examples of Program End Search.

from channel TV receives station on, it is necessary to program the VCR with local

If channel updating If VCR could not

GUIDE) which includes the assigned VCR Plus+ numbers.

USING 0 - 9 KEYS

•Remote will not control every TV, cable box, or DSS made by the manufacturer listed. If you get no response, your particular unit cannot be controlled. There are NO additional codes for the products listed. If your product is not listed, then the remote is not compatible with that product.

VIDEO IN

Control

The following are possible audio broadcast types and on-screen displays.

The signal being received is indicated with an “ ” mark while the selected audio mode is indicated with an arrow.

To display the broadcast signal being received,

	end. To search forward	Fig. 1
	or back 1 index, press	Program 1	INDEX	Program 2 or BLANK
	FF or REW on the
FORWARD SEARCH :FF	remote or VCR while	the current tape position
REVERSE SEARCH :REW	screen left is displayed	Press SEARCH button		End Point

System

channel information. To receive VCR Plus+ channels automatically, perform the steps below. Or, see “Manual VCR Plus+ System Channel Setup” section on page 7.

1 was successful...				distinguish channel map...
	VCR	CLOCK	CHANNEL			VCR	CLOCK	CHANNEL
	VCR Plus+ CH SET				PLEASE SELECT
	COMPLETED				VCR Plus+ CHANNEL

1

VCR CLOCK CHANNEL

ANTENNA : CABLE AUTO SET

WEAK SIGNAL DISPLAY : OFF CABLE/DSS BOX SET UP VCR Plus+ CH SET UP

Press ACTION

to display menu, and

Press

to select CHANNEL.

SELECT :

EXIT : PROG

3	VCR Plus+ PROG.	LIST Press NUMBER keys
		to enter PlusCode

System

Using Multi-Brand Control

➛press DISPLAY*.

(10 sec.).	FF
	Fig. 2
• To cancel, press

•

1

VCR CLOCK CHANNEL

ANTENNA : CABLE

AUTO SET

Press ACTION*

to display menu, and

SELECT	:
EXIT	: ACT I ON

ENTER PLUSCODE NUMBER

1number and press

PROG/VCR+ button

After remote is set up, you can select VCR, TV, or DSS/CABLE for the desired function.

Press VCR, or TV, or DSS/CABLE on the remote.

(Table below shows available unit buttons for each mode.)

Unit	VCR	TV	CABLE/ DSS
Mode
VCR	All	VOL UP/DOWN
	VCR/TV, PLAY, STOP,	POWER, INPUT, number

1 Connect the VCR’s VIDEO OUT jack to the TV’s VIDEO IN jack.

Feature

MTS Stereo and SAP broadcast

Multi-channel Television Sound Stereo (main language) and Secondary Audio Program (sub language) broadcasts are being received simultaneously.

Select STEREO or SAP audio mode.

STOP 12 : 0 0AM	CH 02
STEREO	0 : 00 : 00
	SP
SAP
MONO

STOP or PLAY.		INDEX	Program 1	BLANK	INDEX	Program 2 BLANK
				the current tape position
To Calculate Index Number				Press SEARCH button
					FF	End Point
Example 1:
	Fig. 3 the current tape position
To go to rec. 2 from rec. 4, enter 3 and press REW.
			Press SEARCH button
	INDEX		Program 1	BLANK		Program 2

Tape Operation

2

WEAK SIGNAL DISPLAY : OFF CABLE/DSS BOX SET UP VCR Plus+ CH SET UP

SELECT	:
EXIT	: ACT I ON

VCR CLOCK CHANNEL ANTENNA : CABLE

AUTO SET

WEAK SIGNAL DISPLAY : OFF CABLE/DSS BOX SET UP

Press

to select CHANNEL.

Press

to select VCR Plus+ CH SET UP, and press to

END : ACT I ON END : ACT I ON

	Press ACTION	Press ACTION
	to exit this mode.	to display SELECT
		VCR Plus+ CH.
		Continue with step 2.
2	VCR CLOCK CHANNEL	Press	to select
	SELECT VCR Plus+ CH	channel map for your

2

VCR CLOCK CHANNEL ANTENNA : CABLE

AUTO SET

WEAK SIGNAL DISPLAY : OFF CABLE/DSS BOX SET UP VCR Plus+ CH SET UP

SELECT :		SET :
EXIT	: ACT I ON

Press

to select VCR Plus+ CH SET UP, and press to set.

USING 0 - 9 KEYS	to set.
BACKSPACE :
END : PROG	To Make Corrections,
	press repeatedly
	to delete number, then
	repeat step 3.

• If the PlusCode number entered begins

with “0,” skip to step 5. Display in step 4

TV	EJECT, SAP/ Hi-Fi, DISPLAY,	keys, ENTER, CH UP/
	FF, REW, PAUSE/SLOW,	DOWN, VOL UP/DOWN
CABLE/	REC, SPEED, CM/ZERO,	POWER, ENTER, NUMBER
	COUNTER RESET, TAPE
		VOL UP/DOWN

2 Connect VCR’s L/R AUDIO OUT jacks to the TV’s L/R AUDIO IN jacks.

MTS Stereo broadcast

Multi-channel Television Sound Stereo broadcast. Select STEREO audio mode.

• If stereo broadcast is weak and display flickers, select

STOP 12 : 0 0AM	CH 02
STEREO	0 : 00 : 00
	SP
SAP
MONO

1	2	3	4	5	6	7			If search
Example 2:							End Point	FF
									exceeds a few
To go to rec. 6 from rec. 2, enter 4 and press FF.									seconds in
									BLANK area.

VCR Plus+ CH SET UP

SELECT :		SET :
EXIT	: ACT I ON

set.

KABC	CNN ESPN KNBC			area, and press ADD/
12	13	14	15
51	42	18	33
1	5	10	7	DLT to set.
101	99	110	78
SELECT	:
SET	: ADD / DLT
EXIT	: ACT I ON

3	VCR CLOCK CHANNEL	Press
	AUTO SET	to select MANUAL, and
	MANUAL
		press to set.

will not appear.

4	VCR Plus+ PROG. LIST	Press	to select
	ONCE	ONCE, DAILY

DSS	POSITION	keys (except 100key),
		CH UP/ DOWN
Notes	• Not all functions listed may be controllable.

3 Set the VIDEO/TV selector of your TV (Monitor/Receiver) to “VIDEO.”

MONO audio mode for possibly better results.

1	2	3	4 5	6	7	Upon locating end point,
						➛ search continues 7 sec. past end point,

3	VCR CLOCK CHANNEL	Press
	AUTO SET	to select AUTO SET,	3		Press ACTION to return
	MANUAL			VCR CLOCK CHANNEL
		and press to set.
					to normal screen.

SELECT :	SET :
EXIT : ACT I ON

DAILY(MON-FRI)		(MON~FRI), or WEEKLY
WEEKLY
		record frequency and
SELECT	:	press PROG/VCR+

•In TV or DSS/CABLE mode, it may be necessary to press ENTER after pressing NUMBER keys for channel selection.

SAP broadcast

Secondary Audio Program (sub language) broadcast.

STOP 12 : 0 0AM	CH 02
STEREO	0 : 00 : 00
	SP

NOTE:	indicates start points of each recording. ➛ tape rewinds to 10 sec. before end point,
Note	➛ tape plays to end point and stops.

	PLEASE LEAVE VCR OFF
	•	Make sure to leave
SELECT :	SET :	VCR off (overnight).

4

VCR	CLOCK CHANNEL
GUIDE CH	RECEIVE CH

Press to move cursor

to right, press to enter number, press

END : PROG button to set.

TV Brand Code Numbers
Panasonic	01, 02	Sylvania	................................ 05	JVC	11
Quasar	01, 02	Sharp	06, 07	Hitachi	12
RCA	03	Sony	08	Mitsubishi	07, 13
GE	03	Toshiba	09	Samsung	14
Zenith	04	Sanyo	10	Gold Star	15, 16, 17
Magnavox	05	Fisher	10

■ With a Cable Box (VCR		Cable Box)	You Can	You Cannot
		TV	• view any	• record
ANT	AUDIO IN FROM ANT.	IN OUT	(including	scrambled
	R			channels.

Select SAP audio mode for the sub language.

MONO broadcast

Normal monaural sound broadcast.

SAP

MONO

STOP 12 : 0 0AM	CH 02
STEREO	0 : 00 : 00
	SP
SAP

• If Index Search is started very close to an	Note
index mark, that index mark may not be
	• If Program End Search is started very close
counted in the search.
	to an index mark, that mark may be skipped

over.

EXIT	: ACT I ON
4 VCR				END : ACT I ON
	CLOCK	CHANNEL	Press	Channel map will be updated (overnight).
PLEASE ENTER Z I P CODE			to enter Zip Code and
			enter each number.	If it was successful, “VCR Plus+ CH SET
Z I P CODE : -----
			Press or ACTION to	COMPLETED” appears on screen.
			set.
SELECT :		SET :		And then, press ACTION to exit.
EXIT	: ACT I ON

01		--
02		--
CLEAR	: ADD/DLT
SELECT :		SET:
EXIT	: ACT I ON
VCR		CLOCK CHANNEL
GUIDE CH		RECEIVE CH
01		--
02		--

to set, press to scroll up/down.

•	Repeat step 4 until list
	is complete.
•	Leave line blank if
	station is not received

5	VCR Plus+		PROG.		LIST
	DATE	START		STOP		CH
	13 SAT	2:20P		3:20P		02
	TODAY					SLP
	SELECT RECORD SPEED
	SELECT :			SET:
	END	: PROG

6 VCR Plus+ PROG. LIST

Press to change record speed and press to set.

Press PROG/VCR+ button to end program.

Press PROG/VCR+

Cable Box Brand Code Numbers
Archer	05, 06, 01, 44, 63, 91, 126	Quest	05, 06
Cabletenna	01, 44, 63, 91, 126	Radio Shack	51, 44, 59, 75, 126

or			CABLE BOX	R		scrambled)
					AUDIO	channel.
CATV	L	VHF/UHF		L
	VIDEO	OUT TO TV	IN OUT		VIDEO	• use VCR

MONO

Repeat Play

Set to playback a recording over and over.

Zero Search

To quickly return to a specified tape location.

5	VCR CLOCK CHANNEL
	PLEASE SELECT HOW OFTEN
	TO UPDATE
	R I GHT NOW

Press

to select When to

Repeat these steps as necessary.

If Auto Setup fails, do “Manual VCR

CLEAR	: ADD/DLT
SELECT :		SET:
EXIT	: ACT I ON

or if GUIDE and

RECEIVE CHs are the

same.

DT	START	STOP	CH	SPD
13 2 : 00P		3 : 20P	02	SLP
--	-- : --	-- : --	--	--
--	-- : --	-- : --	--	--
--	-- : --	-- : --	--	--

button again to exit.

•Press ADD/DLT

to delete the program.

Cableview	63, 44, 42, 30, 52, 04, 124, 126		RCA	16, 17, 97, 109
Century	51, 44, 59, 75,	126	Realistic	51, 44, 59, 75, 126
Citizen	63, 44, 42, 30, 52, 04, 124,	126	Recoton	51, 44, 59, 75, 126

IN 1 OUT	VHF/UHF	Remote
VCR		Control to
		select

1 Press ACTION to display menu.

1 Press DISPLAY during play to display

Counter.

EVERY NIGHT
EVERY MONDAY NIGHT
SELECT :	SET :

Update, and press to set.

Plus+ System Channel Setup” on page 7.

To Make Corrections,

press and to move to error, then to change, or ADD/DLT to erase number.

CANCEL	: ADD / DLT
SELECT	:	SET :
EXIT	: PROG

Curtis	08, 09, 61, 53, 87	Regal	14, 15, 28, 41, 102, 103, 104, 108,	130
Diamond	01, 44, 63, 91, 126	Regency	28,	130

channels

Audio Mode for Recording Audio Mode for Playback

2	VCR CLOCK	CHANNEL	Press	to select
	REPEAT PLAY	:OFF	REPEAT PLAY and
	REMOTE WARNING	:ON

2	PLAY 12 : 0 0AM	Press RESET
		0 : 00 : 00

EXIT : ACT I ON

5

7 Press POWER off to set timer Recording. (“TIMER” lights on Multi Function Display.)

Drake		67	Rembrandt		01, 32, 39, 42, 44, 63, 126
Eagle		13, 22, 58, 62, 20, 40, 26, 107	Salora		68
Eastern		28, 130	Samsung		05, 32, 40, 42, 06
GC Brand		63, 44, 42, 30, 52, 04, 124, 126	Scientific Atlanta		08, 09, 61, 53, 87
Gemini		04, 124	Sheritech		27
General Electric		57, 01	Signal		26, 112
General Instruments ..		01, 02, 03, 04, 34, 55, 83, 106,	SL Marx	32, 40, 42, 06, 43, 44, 52, 63, 126
	65, 67, 68, 115, 117, 118, 124, 91		Sprucer		16, 17, 97, 109
Hamlin	14, 15, 28, 41, 102, 103, 104, 108, 130		Standard Components		32, 39, 42, 44, 126
Hitachi		31	Stargate ..	32, 40, 63, 44, 42, 30, 52, 04, 06, 124, 126
Jasco		04, 124	Sylvania		19

					without using
					Multi-brand
					control feature.
■ Connect With Two Cable Boxes
					You Can	You Cannot
			VCR	• record and view		• view channel
	CABLE BOX	AUDIO IN FROM ANT.			both scrambled	other than

1 Press SAP/ Hi-Fito display audio mode. (Display disappears after 5 seconds.)

2	Press SAP/ Hi-Fi
STEREO	repeatedly to select
SAP	desired mode.
MONO

1 Start playback.

See p. 5 of “Basic Operations”

Instruction book.

2 Press SAP/ Hi-Fito display audio mode. (Display disappears after 5 seconds.)

AUTO SHUT- OFF		:OFF	press to set ON or
IDIOMA/LANGUE : ENGLISH
VCR’ S OUTPUT CH		:3	OFF.
SELECT :	SET :		ON:Play repeats at tape end
EXIT : ACT I ON
			or if unrecorded portion
			over 30 sec. is detected.

3 Press ACTION to return to normal screen.

SP COUNTER at desired

position to reset to “0:00:00”.

3 Continue to record, playback, etc.

4 Press Stop.

6	VCR	CLOCK CHANNEL
	PLEASE LEAVE VCR OFF
	END	: ACT I ON

Press ACTION to return to normal screen.

•Make sure to leave VCR off (overnight).

To Change or Update Auto VCR Plus+ System Channel Setup

(E.g. you selected wrong channel map or zip code.)

a Do “Auto VCR Plus+ System Channel Setup (Part 1)” steps 1~3 on above left.

Press ACTION twice to end setup.

Do normal Timer Record if...

•PlusCode number is not listed for program.

•program (e.g. sports event) may run over set stop time.

See page 6 of “Basic Operations” book to:

Jerrold	01, 02, 03, 04, 34, 55, 83, 106,	Teknika	74
	65, 67, 68, 115, 117, 118, 124, 91	Telecaption	77, 127
Macom	31	Teleview	32, 40, 42, 06
Magnavox	26, 112	Texscan	18, 19
Matsushita	16, 17, 97, 109	Tocom	33, 34, 01, 42, 66, 91
Movietime	32, 39, 42, 44, 126, 38, 40	Toshiba	36
NEC	38, 40, 32	Uniden Satelite	65
NOVAVISION	08, 09, 61, 53, 87	Unika	01, 44, 63, 91, 126
NSC	38, 40, 32	Universal	42, 43, 44, 52, 63, 126
Oak	46, 11, 129	Videoway	07, 23, 50, 129
Oak Sigma	46, 11, 129	Vid Tech	64
Panasonic	16, 17, 97, 109	Vidtek	64
Philips	07, 13, 20, 23, 24, 50, 128, 129	Viewstar	13, 22, 58, 62, 20, 40, 26, 107
Pioneer	05, 06	Zenith	07, 23, 50, 129
Pulsar	63, 44, 42, 30, 52, 04, 124, 126

		R				and	the one
	IN OUT	L VHF/UHF				unscrambled	selected for
							any type of
						channels if
		VIDEO	OUT TO TV			additional	recording.
					TV
		IN 1 OUT				equipment is	• do a Timer
ANT				IN	OUT	added.
or	2-Way Splitter		A/B Switch			This connection	recording of
		CABLE BOX		R	AUDIO	requires: two	a channel
CATV		IN OUT	IN 1 IN 2	L		converter	unless you
	OUT 1 OUT 2				VIDEO	boxes, an A/B	select it at
					VHF/UHF	switch, and a 2-	the cable
						way splitter.	box.

• Refer to “Receivable Broadcast Types” above.

•Arrow indicates selection.

3 Do a recording.

See p. 5 of “Basic Operations”

Instruction book.

Notes

3

H I F I : L/R

H I F I : L

H I F I : R

NORMAL

•Arrow indicates selection.

Press SAP/ Hi-Fi repeatedly to select desired mode.

•Select “HIFI(L/R)” or “HIFI(L)” or “HIFI(R)” to listen to stereo recordings in stereo sound. Select “NORMAL” for monaural sound.

Commercial Skip

VCR fast forwards (skips) over 1~3 minutes of recorded tape.

1 Press CM/ZERO in Play mode.

•Press CM/ZERO repeatedly to change skip time as shown below.

PLAY

5	REW	12 : 3 0AM CH 02	Press CM/ZERO in
		0 : 30 : 30	Stop mode to start
		SP

ZERO SEARCH.

• Unit will go into FF or REW mode and stop at the last point the Counter was set to 0:00:00.

STOP 12 : 3 1AM CH 02

0: 00 : 00

SP

Notes

• When Auto Set is performed, channels set

in initial setup (page 4 of “Basic

Operations” book) will be replaced by

automatically downloaded data.

VCR CLOCK CHANNEL

UPDATE VCR Plus+ CH

SELECT VCR Plus+ CH

SELECT :	SET :
EXIT : ACT I ON

b Press to select UPDATE VCR Plus+ CH

or SELECT VCR Plus+ CH, then press .

c If you selected UPDATE VCR Plus+ CH,

•cancel a timer recording in progress.

•review, replace, or clear program contents.

Important for DSS/Cable Box Users

•When recording via DSS, the receiver must be left on. When recording via cable or antenna, DSS receiver must be off.

•When recording via a cable box, leave box on and tuned to channel to be recorded.

Notes

• Do not overlap program times.

• See “Important for DSS/Cable Box Users” above.

• Make each entry within 1 minute or VCR exits setup.

DSS Brand Code Numbers
Toshiba			92	Panasonic	............................................................ 96
Hitachi/ Hughes		....................................................	93	RCA	97
Magnavox/ Uniden 1			94	Sony	98, 105
Magnavox/ Uniden 2			95
Important	•	Due to changes in infra-red commands used by manufacturers, some brands have
Notes		several codes. If your unit does not respond to the first code, please try the next one.
	•	Some TV, Cable Box and DSS Box brands require you to turn on the power manually.

•Only tapes recorded in Hi-Fi stereo will playback with true stereo sound. Standard stereo tapes will playback in monaural sound.

•To listen to Hi-Fi stereo playback, the VCR AUDIO (L/R) jacks must be connected to a stereo TV or an external stereo amp and speakers. (See top of this page.)

•If tracking is adjusted during playback, Hi-Fi audio may revert to normal audio.

•Hi-Fi and normal audio playback volume level may differ.

*Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again.

1st Press 1 min Skip

2nd Press 2 min Skip

3rd Press 3 min Skip

•No indication appears.

•	Make each entry within 1 minute or VCR will
	leave this mode.
•	Once local channels have been programmed,
	they will stay in memory, even in the case of a
	power failure.
•	If the start time for a timer recording comes up
	during Auto VCR Plus+ System Setup, the
	timer recording will have priority.

perform steps 4~6 in the “Auto VCR Plus+ System Channel Setup (Part 1)” section on above left.

If you selected SELECT VCR Plus+ CH, perform steps 2~3 in the “Auto VCR Plus+ System Channel Setup (Part 2)” section on above.

• Once VCR Plus+ channel setup is done, channels stay in memory. If there’s a power outage,

channel setup may be lost. Please do channel setup again.

• Obtain unlisted PlusCode numbers by calling 1 - 900 - 454 - 7587. Call costs about $.95 per

minute.

*Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again.

- 2 - - 3 - - 4 - - 5 - - 6 - - 7 -