![](/images/new-backgrounds/1312833/3128333x1.webp)
Important Safeguards and Precautions
Before Using
• Important
Connections / Initial Setup (Ready to Play)
Playback / Record on a Tape
•
Timer Recording
Location of Controls
• Timer
Congratulations
Head Cleaning
Please make all cable or antenna connections before plugging into the AC
Playback a Tape
Record on a Tape
Timer Recording
Remote Control Buttons
FOR YOUR SAFETY, READ AND RETAIN ALL SAFETY AND OPERATING INSTRUCTIONS. HEED ALL WARNINGS IN THE MANUAL AND ON THE UNIT
OUTDOOR ANTENNA INSTALLATION
1SAFE ANTENNA AND CABLE CONNECTION
If an outside antenna or cable system is connected to the equipment, be sure the antenna or cable system is grounded so as to provide some protection against built up static
on your new purchase! With proper use, this dependable product will provide years of enjoyment. Please fill in the information below. (Serial number is on tag on back of VCR.)
Old or damaged tapes may clog heads.
Video Head Clog Sensor
V I DEO HEADS MAY |
outlet.
Plugging the VCR Power Cord into an AC wall outlet starts auto channel and clock set.
Connecting
1 Insert a tape.
• Loose or peeling labels may cause tape jam.
1 Insert a tape with a record tab (p. 3).
2 Press CH or NUMBER keys
Connections
1 1) Press PROG*.
2)Press
to display program screen.
EJECT
(Ejects tape)
LIGHT
(Illuminates the remote)
Recording
INSTALLATION
1 POWER SOURCE CAUTION |
Operate only from a power source indicated on |
the unit or in this manual. If necessary, have |
your Electric Utility Service Company or Video |
Products Dealer verify the power source in your |
home. |
charges and voltage surges.
Section 810 of the National | NEC - NATIONAL |
ELECTRICAL CODE | |
|
Electrical Code, ANSI/NFPA 70 (in Canada, part 1 of the Canadian Electrical Code) provides information with respect to proper grounding of the mast and supporting
• Date of Purchase |
• Dealer Purchased From |
• Dealer Address |
• Dealer Phone No. |
play if clogging is detected. | NEED CLEAN I NG |
PLEASE I NSERT HEAD | |
To remove screen, press | CLEAN I NG CASSETTE |
OR REFER TO MANUAL | |
PLAY. | END : PLAY |
|
• Use “dry” type head |
cleaning cassette only. |
For ANT./Cable ➛ VCR ➛ TV
1 Connect cable from | TV |
Antenna/Cable to VCR’s IN |
|
VCR | IN FROM ANT. |
| 1 IN from |
2 Press PLAY to play tape.
• If tape has no rec. tab (p. 3), auto play begins.
to select the channel.
•For “LINE” input, see p. 9 of “Advanced Operations” book.
•If recording from a channel over 100, first press 100 key then the other 2 digits.
• Initial
2 | TIMER PROG. | LIST |
| 1) Set record DATE, | Example |
|
|
|
|
|
|
| ||
| Today |
|
|
|
|
|
|
| ||||||
DATE | START | STOP | CH |
|
|
|
|
|
|
| ||||
| 13 SAT | press | to select: |
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
| ||||||
| TODAY |
|
| SLP | 1~31= one time, |
|
|
|
|
|
|
|
| |
| SELECT START DATE |
| 8 | 9 | 31 | 1 | 2 | 6 |
| |||||
|
| or DAILY= MON~ FRI, |
|
| ||||||||||
| SELECT : | SET: |
|
|
|
|
|
|
|
|
| |||
|
| or WEEKLY= same time |
| SELECT | / | Selection Order | DAILY | |||||||
| END | : PROG |
|
| 7 |
POWER
(Turns VCR off/on)
VCR (mode)
(Enables VCR functions)
VCR/TV
TV (mode)
(Enables TV functions)
DSS/CABLE mode
(Enables DSS/CABLE functions)
•
2 POLARIZED OR GROUNDING PLUG |
As a safety feature, this Video product comes |
with either a polarized power cord plug (one |
blade is wider than the other), or a |
grounding type plug. |
structure, grounding of the
of grounding conductors, location of antenna discharge unit, connection to grounding electrodes and requirements for the grounding electrode.
• Model No. |
|
• Serial No. |
|
(Part No. |
• Follow cleaning tape instructions carefully. |
Excessive use of tape can shorten head life. |
Safeguards •
FROM ANT. jack. |
2 Connect VCR’s OUT TO TV |
jack to TV’s ANT. IN jack |
ANT./CABLE |
OUT TO TV |
2 |
Special Features During Play
Forward/Reverse Scene Search
➛ Press FF or REW. |
3 Press SPEED
to select record speed (p. 3).
Setup •
each week and press . |
|
|
|
|
| |
WEEKLY |
| WEEKLY |
| WEEKLY | ||
2) Set remaining items, | (SAT) |
| (MON) |
| (SUN) | |
press | to select and |
|
|
|
|
|
(For TV or VCR mode)
PLAY (Plays a tape)/
FAST FORWARD/SEARCH
INPUT
(For LINE or channel)
PROGRAM
(Displays Timer Program screen)
Location
POLARIZED PLUG CAUTION:
This plug will only fit into an outlet one way. If you cannot fully insert the plug, try reversing it. If it still will not fit, have an electrician install the proper wall outlet. Do not defeat the safety feature by tampering with the plug.
GROUNDING PLUG CAUTION:
This plug will only fit into a
3 POWER CORD |
Make sure power cords are routed so that they |
are not likely to have anything rest on them, roll |
over them, or be in the way of walking traffic. |
If an extension cord is used, make sure it also |
has either a polarized or grounded plug and that |
the cords can be securely connected. Frayed |
cords, damaged plugs, and damaged or cracked |
2KEEP ANTENNA CLEAR OF HIGH VOLTAGE POWER LINES OR CIRCUITS
An outside antenna system should be located well away from power lines, electric light or power circuits and where it will never come into contact with these power sources if it should happen to fall. When installing an outside antenna, extreme care should be taken to avoid touching power lines, circuits or other power sources as this could be fatal. Because of the hazards involved, antenna installation should be left to a professional.
USING THE VIDEO UNIT
If the unit has been in storage or moved to a new location, refer first to the INSTALLATION section of these safeguards.
1 | KEEP THIS VIDEO UNIT AWAY FROM WATER OR |
| MOISTURE OF ANY KIND. |
2 | IF EQUIPMENT IS EXPOSED TO RAIN, MOISTURE, OR |
| STRONG IMPACT, unplug the unit and have it inspected by |
| a qualified service technician before use. |
Accessories
Remote Control
LSSQ0342
Batteries 2 “AA”
RF Coaxial
Cable
VJAS0196
Cleaning the VCR
Use soft, dry cloth or dusting attachment of a vacuum to remove dust from all cabinet vent holes. You may moisten cloth with nonabrasive, antistatic cleaner/ polisher.
Caution:
Alcohol and various solvents could damage finish.
Specifications
Accessories • Head Cleaning •
with included RF Cable |
accessory. |
For DSS/Cable Box ➛ VCR ➛ TV
1 Connect your cable box’s OUT jack to the VCR’s IN TV
FROM ANT. jack with an RF cable.
2 Connect VCR’s OUT TO TV |
jack to TV’s ANT. IN jack |
VHF/UHF
VCR | IN FROM ANT. Cable TV | |
|
| Converter Box |
|
| IN from |
|
| ANT./CABLE |
| OUT TO TV | 1 |
VHF/UHF 2
➛ Press PLAY to release. |
After search has begun, each additional press of FF or REW changes speed as shown below.
[SLP] : Approx. 21X | ↔ Approx. 9X | ||
[LP] | : Approx. | 9X | ↔ Approx. 7X |
[SP] | : Approx. | 7X | ↔ Approx. 3X |
If at 21X, 9X, or 7X speed the picture is interrupted, change speed to 9X, 7X, or 3X.
Notes
•Picture interruption may occur with some TVs.
•FF and REW search speed may vary depending on current tape position.
4 Press REC
to start recording.
•To edit, press PAUSE/SLOW to pause, and again to resume recording.
5 Press STOP to stop recording.
![](/images/new-backgrounds/1312833/3128333xi6.webp)
One Touch Recording
(record in progress)
Press REC repeatedly to set length as follows: 30 min. ➛ 1 hr. ➛ 1:30 ➛ 2:00 ➛ 3:00
➛4:00 ➛ exit.
The VCR shuts off at the length set.
Clock Set • Select Channel
|
|
|
|
|
|
|
| press to set START/ STOP times, CH(channel) or | |
|
|
|
|
|
|
|
| LINE input (p. 9 of “Advanced Operations” book), and | |
|
|
|
|
|
|
|
| tape speed (p. 3). | |
|
|
|
|
|
|
|
| Press PROG to end programming. | |
3 |
|
|
|
|
| To Enter More Programs | |||
TIMER PROG. |
| L I ST |
| ||||||
DT START | STOP |
| CH | SPD | |||||
| 13 2 : 00P | 3 : 20P | 02 | SLP | Press | to select and | |||
| |||||||||
| press to set an unused program. | ||||||||
| |||||||||
| CANCEL : ADD / DLT |
|
| Then repeat step 2. | |||||
| SELECT | : |
|
| SET : |
| Or, press PROG to exit. | ||
| EXIT | : PROG |
|
| |||||
|
|
|
|
|
|
|
|
4 Press POWER off to set the timer recording. (“TIMER” lights on Multi Function Display.)
(Fast forwards tape/ forward visual search)
REWIND/SEARCH
(Rewinds tape/ reverse visual search)
STOP (Stops tape)
![](/images/new-backgrounds/1312833/3128333xi8.webp)
![](/images/new-backgrounds/1312833/3128333xi9.webp)
![](/images/new-backgrounds/1312833/3128333xi10.webp)
Remote keys
PLAY, STOP, REW, and FF function as operation keys when menus are displayed.
ACTION
NUMBER Keys
(Selects channel directly)
ADD/DELETE
(Adds or deletes a channel)
DISPLAY
(Displays VCR status)
TAPE POSITION
(Locates tape position)
SEARCH/ ENTER
(Sets Search System /TV channel)
of Controls (Remote Control
wire insulation are hazardous and should be |
replaced by a qualified service technician. |
Overloaded outlets and extension cords are fire |
hazards and should be avoided. |
3 DURING AN ELECTRICAL STORM |
During a lightning storm, whether indoors or outdoors, or |
before leaving the unit unused for extended periods of time, |
disconnect all equipment from the power source as well as |
the antenna and cable system. |
Power Source: | 120 V AC, 60 Hz |
Power Consumption:Power On | |
| Approx. 23 W |
| Power Off |
Loading
with included RF Cable |
accessory. |
Still (Freeze) Picture
➛Press PAUSE/SLOW.
➛Press PLAY to release.
Record one station, watch another
Press VCR/TV
(“VCR” goes out on Multi Function Display),
•
Review, Replace, or Clear Program
Cancel a Timer Recording
(Displays menu)
COUNTER RESET
(Resets counter to zero)
SPEED
(Changes tape speed)
4 DO NOT BLOCK VENTILATION HOLES |
Ventilation openings in the cabinet release heat |
generated during operation. If they are blocked, |
heat |
that may result in a fire hazard or heat damage |
to cassettes. For protection, follow these rules: |
a. Never cover ventilation slots or the unit while |
in use, or operate the unit when placed on a |
bed, sofa, rug, or other soft surface. |
b. Avoid |
case or rack, unless proper ventilation is |
provided. |
5 AVOID EXTREMELY HOT LOCATIONS OR |
SUDDEN TEMPERATURE CHANGES |
Do not place the unit over or near any kind of |
4 WHEN THE UNIT IS PLUGGED IN | |
• | Never expose the unit to rain or water. DO NOT |
| OPERATE if liquid has been spilled into the unit. |
| Immediately unplug the unit, and have it inspected by a |
| service technician. Fire and shock hazards can result from |
| electrical shorts caused by liquid contact inside. |
• | Never drop or push any object through openings in the |
| unit. Some internal parts carry hazardous voltages and |
| contact can cause electric shock or fire hazard. |
• | Avoid placing the unit directly above or below your TV set |
| as this may cause electrical interference. Keep all |
| magnets away from electronic equipment. |
5 USING ACCESSORIES | |
Use only accessories recommended by the manufacturer to | |
avoid risk of fire, shock, or other hazards. |
To order accessories, call toll free
Loading the Batteries
| Approx. 3.0 W |
Video Signal: | EIA Standard NTSC color |
Video Recording | 4 rotary heads helical |
System: | scanning system |
Audio Track: | 1 track (Normal) |
| 2 channel |
|
Tuner:
Broadcast Channels: VHF 2 ~ 13, UHF 14 ~ 69
CABLE Channels: Midband A ~ I (14 ~ 22) Superband J ~ W (23 ~ 36) Hyperband AA ~ EEE
Batteries • Prevent
Initial Setup (Ready to Play)
1 Turn TV on and tune to channel 3.
2 Plug VCR Power Cord into AC wall outlet. VCR comes on and auto channel and clock set starts.
• If screen below does not appear, check |
VCR - TV connection and, if TV is |
tuned to channel 3, try switching it to |
3 Settings are made automatically. When setup is done, this screen appears.
VCR |
| CLOCK |
| CHANNEL |
9/29/ 2002 SUN |
| 2 : 20PM | ||
|
|
|
| DST : ON |
SETT I NG : CH 10
AUTO CLOCK SET
COMPLETED
Frame by Frame Picture
➛Press PAUSE/SLOW in Still mode.
➛Press PLAY to release.
Slow Motion Picture
➛Hold down PAUSE/SLOW in Still mode.
➛Press PLAY to release.
Notes
• These features work best in SP or SLP mode. |
➛select channels on TV (recording continues).
![](/images/new-backgrounds/1312833/3128333xi24.webp)
Select channels on VCR (in STOP or PAUSE mode)
Press VCR/TV
(“VCR” lights up on Multi Function Display),
➛select channels on VCR.
Notes
• Watching one channel and recording |
another is not possible when using Cable |
Playback • Record •
(Recording is not in progress)
a 1) Press PROG. |
|
| ||||||
| 2) Press |
| to select LIST. |
| ||||
b | TIMER PROG. | L I ST |
| Press | to select | |||
DT | START | STOP | CH | SPD | ||||
| 7 | 9 : 00A 12 : 00A | 08 | SP | desired program. | |||
| 8 | 10 : 00P 12 : 00P | 02 | SP |
|
| ||
| 10 | 8 : 00P | 9 : 00P | 10 | SP |
|
| |
| SU |
| 9 : 00P 10 : 00P | L1 | LP |
|
| |
| CANCEL : ADD / DLT |
|
|
|
| |||
| SELECT : | SET : |
|
|
| |||
| EXIT | : PROG |
|
|
|
|
(Recording is in progress)
Press POWER and then STOP within 10 seconds to cancel the Timer Recording.
(The TIMER indicator goes out on Multi Function Display.)
PAUSE/SLOW
(Displays still, frame by frame, or slow motion picture)
(Selects audio mode for play or record)
VOLUME UP/DOWN
(Adjusts TV volume)
COMMERCIAL SKIP/ ZERO SEARCH
(Starts Commercial Skip/ Zero Search)
RECORD
(Records a program, etc.)
CHANNEL UP/DOWN TRACKING/ V-LOCK
(Selects channel/ reduces picture noise during Play and Slow mode)
heater or radiator, in direct sunlight, inside a |
closed vehicle, etc.. Do not move the unit |
suddenly between areas of extreme temperature |
variation. If the unit is suddenly moved from a |
cold place to a warm place, moisture may |
condense in the unit and on the tape. |
6 TO AVOID PERSONAL INJURY |
• Do not place unsecured |
equipment on a sloping |
surface.
6 CLEANING THE UNIT |
Unplug the unit. Then, use a clean, dry, chemically |
untreated cloth to gently remove dust or debris. DO NOT |
USE cleaning fluids, aerosols, or forced air that could over- |
spray, or seep into the unit and cause electrical shock. Any |
substance such as wax, adhesive tape, etc. may mar the |
cabinet surface. Exposure to greasy, humid, or dusty areas |
may adversely affect internal parts. |
SERVICE
(37 ~ 64)
Lowband
Ultraband 65 ~ 94, 100 ~ 125
Operating
Temperature: 5 °C ~ 40 °C (41 °F ~ 104 °F)
Operating Humidity: 10 % ~ 75 %
Tape Erasure
channel 4. |
• To change VCR’s output channel, |
please refer to “VCR’s Output Channel” |
in Advanced Operations book (p. 12). |
If “AUTO CLOCK SET IS INCOMPLETE” appears, manually set clock.
See below.
VCR |
| CLOCK |
| CHANNEL |
AUTO CLOCK SET IS
• The sound will be muted. | |
• | To reduce picture noise, see “Manual |
| Tracking Control” on p. 3. |
• | After VCR is in Still or Slow mode 3 minutes, it |
| auto switches to Stop mode to protect the tape |
| and the video heads. |
Box or DSS Receiver. |
• After 5 minutes in Pause mode, VCR stops |
to protect the tape and the video heads. |
Auto Operation
c To Replace program... |
TIMER PROG. | LIST |
| 1) Press | to display. | |
DATE | START | STOP | CH |
|
|
7 SUN 9:00A 12:00A | 08 | 2) Repeat Step 2 | |||
TODAY |
|
| SP | (above) to set new | |
|
|
| |||
SELECT START DATE |
| programs. | |||
SELECT : | SET: |
| |||
|
|
| |||
END | : PROG |
|
|
|
|
Light Tower Universal Remote Control
LIGHT button: When pressed, available buttons light and selected mode button (TV, VCR, or DSS CABLE) flashes 5 seconds. If no button is pressed, light goes out in 5 seconds. Also, hold down a button to confirm the selected mode (mode button flashes) in the dark.
EJECT button: Press to eject tape. EJECT is not available during recording.
Buttons, Front View of the VCR)
•Do not place this unit on any
support that is not firm, level, and adequately strong. The unit could fall causing serious injury to a child or adult and damage to the unit.
• An appliance and cart combination should be |
moved with care. Quick stops, excessive force, |
1 | DO NOT SERVICE THIS PRODUCT YOURSELF |
| If, after carefully following the detailed operating instructions, |
| this Video product does not operate properly, do not attempt |
| to open or remove covers, or make any adjustments not |
| described in the manual. Unplug the unit and contact a |
| qualified service technician. |
2 | IF REPLACEMENT PARTS ARE REQUIRED |
| Make sure the service technician uses only parts specified |
![](/images/new-backgrounds/1312833/3128333xi26.webp)
Battery replacement caution
• | Do not mix old and new batteries. |
• | Do not mix alkaline with manganese batteries. |
Weight:2.7 kg (6.0 lbs).
Dimensions: 430 (W) x 98 (H) x 242 (D) mm
Note: Designs and specifications are subject to change without notice.
•
INCOMPLETE
PLEASE SET CLOCK BY PRESSING ACTION KEY
3 Press STOP to stop tape.
Press REW or FF in Stop mode to Rewind or Fast Forward tape.
Press EJECT on remote,
or STOP/EJECT on VCR to eject tape.
|
|
| or |
|
| |
To Clear program... | ||||||
TIMER PROG. |
| L I ST | Press ADD/DLT. | |||
DT | START | STOP | CH | SPD | ||
8 | 10 | : 00P | 12 | : 00P | 02 | SP |
10 | 8 | : 00P | 9 | : 00P | 10 | SP |
SU | 9 : 00P | 10 | : 00P | L1 | LP |
Front View of the VCR
and uneven surfaces may cause the appliance |
by the manufacturer, or those having the same safety |
Plugging the AC Power Plug into an AC outlet
This video recorder, equipped with
CANCEL : ADD / DLT |
and cart combination to overturn. |
• Carefully follow all operating instructions and |
use the manufacturer's recommended |
accessories when operating this unit or |
connecting it to any other equipment. |
Safety Precautions
characteristics as the original parts. The use of unauthorized |
substitutes may result in fire, electric shock, or other |
hazards. |
3 HAVE THE SERVICE TECHNICIAN PERFORM A SAFETY |
CHECK |
After any service or repairs to the unit, request the service |
technician to conduct a thorough safety check as described |
in the manufacture’s service literature to ensure that the |
video unit is in safe operating condition. |
Prevent Accidental Tape Erasure
Break off the tab to | To record again |
prevent recording. |
|
Features for a Quality Picture
Digital Auto Picture
Automatically controls the video output signal for less noise depending on the tape condition.
Specifications •
VCR | CLOCK | CHANNEL |
CH AUTO SET PROCEEDING |
Manual Clock Set
If Auto Clock Set was incomplete.
1 Press ACTION* on remote to display CLOCK menu.
VCR | CLOCK | CHANNEL |
HQ (High Quality) system, is compatible with existing VHS equipment. Only use tapes with the mark. Only tapes tested and inspected for use in 2, 4, 6, and 8 hour machines are recommended.
SELECT | : | SET : |
EXIT | : PROG |
|
d Press PROG to end the programming.
| Cassette Compartment STOP/EJECT |
| PLAY |
POWER |
|
| FAST |
Video | FORWARD/ |
Warning: To prevent fire or shock hazard, do not expose this equipment to rain or moisture.
CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.
Avertissement: Afin de prévenir tout risque d’incendie ou de chocs électriques, ne pas exposer cet appareil à la pluie ou à une humidité excessive.
Attention: Pour éviter les chocs électriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu’au fond.
Record Tab | Cover the hole | |
with cellophane | ||
| ||
Screw driver | tape. | |
|
Record/Playback Time
Digital Auto Tracking
Continuously analyzes the signal and adjusts for optimum picture quality.
Manual Tracking Control
(to reduce picture noise)
Use during Playback and Slow Motion mode to reduce picture noise.
Press CH (TRACKING) / on the remote
Record/Playback
CANCEL : STOP |
VCR CLOCK CHANNEL
AUTO CLOCK SET |
PROCEEDING |
1/ / |
| : |
|
| DST:ON |
SELECT MONTH |
| |
SELECT | : | SET : |
EXIT | : ACT I ON |
|
2 Press to select the month and
to set. In the same manner, select and
Auto Operation Functions
Auto Play
Insert a tape ➛ Power comes on ➛ Play starts if there is no record tab (see p. 3).
![](/images/new-backgrounds/1312833/3128333xi40.webp)
Auto Rewind
Play | ➛ Tape end ➛ Rewind |
Notes
• | If you are using a Cable Box, VCR Timer Programming Channel (Step 2 above) must |
| be set to the Cable Box output channel and your Cable Box must be manually set to |
| the desired channel. The Cable Box must be left on. |
• | If a power interruption occurs while programming the timer, the timer program(s) may be |
| canceled. If “TIMER PROGRAMS WERE LOST DUE TO POWER INTERRUPTION” appears |
Input |
| SEARCH |
Connector |
|
|
|
| REWIND/ |
Audio Input |
| SEARCH |
Connector | CHANNEL UP/DOWN | Remote RECORD |
(L/R) | TRACKING/ | Sensor |
CAUTION |
RISK OF ELECTRIC SHOCK |
DO NOT OPEN |
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, |
DO NOT REMOVE COVER (OR BACK) |
NO |
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL |
This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any inside part of this unit.
This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included. Therefore, it should be read carefully in order to avoid any problems.
Only use tapes with the |
|
| mark in this unit. | ||
|
| ||||
Tape Speed | Type of Video Cassette | ||||
|
|
|
|
| |
Setting | T60 | T120 | T160 | ||
|
|
|
|
|
|
SP | 1 Hour | 2 Hours | 2 Hours | ||
(Standard Play) | 40 Minutes | ||||
|
|
|
|
|
|
LP | 2 Hours | 4 Hours | 5 Hours | ||
(Long Play) | 20 Minutes |
control or on the VCR until the picture clears up. To return to Auto Tracking, press POWER off, then on again a few seconds later.
R |
| R |
| |
R | R | R | R | |
R | R | |||
|
|
Time
CANCEL : STOP |
If you use a cable box, turn it on and set it to the Public Broadcasting Station (PBS) channel in your time zone. If you use a DSS receiver, it must be turned off.
WARNING
set the date, year, time, and DST (Daylight Saving Time).
VCR |
| CLOCK |
| CHANNEL |
9/29/ 2002 SUN 2 : 20PM
DST:ON
SET COMPLETED
SET | : |
START | : ACT I ON |
Fast Forward |
![](/images/new-backgrounds/1312833/3128333xi42.webp)
Play Auto Eject
(Repeat Play must be off)
Play ➛ Tape end ➛ Rewind ➛ Tape ejects if there is no record tab
*Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again.
Important notes when using DSS receiver
•When recording programs via DSS receiver, DSS receiver must be left on.
•When recording programs via an antenna or cable, DSS receiver must be turned off.
*Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again.
FCC Warning: Any unauthorized changes or modifications to this equipment would void the user’s authority to operate.
SLP | 3 Hours 6 Hours 8 Hours |
(Super Long Play) |
In Still mode, CH (TRACKING) /
operate as a
Over tightening “Nut type” RF coaxial cables may damage jacks. Finger tighten only.
3 Press ACTION to start clock and exit.
- 2 - | - 3 - | - 4 - | - 5 - | - 6 - | - 7 - |