Safety precautions

■Unit

•Avoid using or placing this unit near sources of heat.

•Do not use while operating a motorized vehicle. It may create a traffic hazard and is illegal in many areas.

•Do not listen with this unit at high volume in places where you need to hear sounds from the surrounding environment for safety, such as at railroad crossings, and construction sites.

WARNING:

To reduce the risk of fire, electric shock or product damage,

•Do not expose this unit to rain, moisture, dripping or splashing.

•Do not place objects filled with liquids, such as vases, on this unit.

•Use only the recommended accessories.

•Do not remove covers.

•Do not repair this unit by yourself. Refer servicing to qualified service personnel.

■Allergies

•Discontinue use if you experience discomfort with the speakers or any other parts that directly contact your skin.

•Continued use may cause rashes or other allergic reactions.

THE FOLLOWING APPLIES IN THE U.S.A. AND CANADA

This device complies with Part 15 of FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.

FCC ID : ACJ-RP-BTD10

IC : 216A-RPBTD10

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that are deemed to comply without testing of specific absorption ratio (SAR).

THE FOLLOWING APPLIES ONLY IN THE U.S.A.

FCC Note:

 

This equipment has been tested and found to comply with the limits for a Class B

 

digital device, pursuant to Part 15 of the FCC Rules.

 

These limits are designed to provide reasonable protection against harmful

 

ENGLISH

interference in a residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and used in accordance

 

with the instructions, may cause harmful interference to radio communications.

 

However, there is no guarantee that interference will not occur in a particular

 

installation. If this equipment does cause harmful interference to radio or

 

television reception, which can be determined by turning the equipment off and

 

on, the user is encouraged to try to correct the interference by one or more of the

 

following measures:

 

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

Any unauthorized changes or modifications to this equipment would void the user’s authority to operate this device.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and

(2)this device must accept any interference received, including interference that may cause undesired operation.

Declaration of Conformity

Trade Name: Panasonic

Model No.: RP-BTD10

Responsible Party: Panasonic Corporation of North America

Two Riverfront Plaza, Newark, NJ 07102-5490

Support Contact: http://www.panasonic.com/contactinfo

THE FOLLOWING APPLIES ONLY IN CANADA.

CAN ICES-3(B)/NMB-3(B)

THE FOLLOWING APPLIES ONLY IN THE U.S.A.

FCC CAUTION

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

VQT5J78

7

7

Page 6 Page 8
Page 7
Image 7
Panasonic RP-BTD10 owner manual Safety precautions, Unit, Allergies, FCC Note
Page 6 Page 8

RP-BTD10 specifications

The Panasonic RP-BTD10 is a remarkable addition to the audio accessory market, showcasing the brand’s commitment to high-quality sound and user-friendly design. This wireless headphone model combines modern aesthetics with cutting-edge technology, making it a preferred choice for music enthusiasts and casual listeners alike.

One of the standout features of the RP-BTD10 is its Bluetooth connectivity, which allows users to effortlessly connect to a wide range of devices, including smartphones, tablets, and laptops. This wireless capability not only enhances convenience but also provides users with the freedom to move without the hassle of tangled wires. The headphones support advanced Bluetooth profiles, ensuring seamless pairing and stable connections, which is essential for uninterrupted audio streaming.

The design of the RP-BTD10 is both stylish and ergonomic, featuring plush ear cushions that provide comfort for extended listening sessions. The adjustable headband ensures a secure fit, accommodating various head sizes. Moreover, the headphones are lightweight, reducing fatigue during long periods of use.

Sound quality is paramount in any audio device, and the RP-BTD10 does not disappoint. It is equipped with high-performance drivers that deliver rich bass and clear treble, ensuring a well-rounded audio experience. Whether users are listening to their favorite music genres or delving into podcasts, the headphones offer exceptional sound clarity and fidelity.

Another key characteristic of the RP-BTD10 is its battery life. With an impressive playback time, users can enjoy extended listening sessions without needing frequent recharges. The headphones also feature a quick charge option, allowing for several hours of use with just a short charging time, which is perfect for those on the go.

In addition to these features, the RP-BTD10 is designed with practicality in mind. It includes integrated controls on the ear cups, enabling users to easily adjust volume, skip tracks, and answer calls without needing to reach for their devices. This hands-free functionality enhances the user experience, particularly for those who lead active lifestyles.

Overall, the Panasonic RP-BTD10 stands out as a reliable and stylish wireless headphone option, combining superior sound quality, comfort, and convenience in a sleek package. It caters to diverse audio needs while showcasing Panasonic's dedication to innovation and excellence in consumer electronics. With its blend of technology and design, the RP-BTD10 is a worthy investment for anyone seeking to elevate their audio experience.
Top Page Image Contents