Panasonic SB-AK770, SB-WAK770 Using the timers, Setting the clock, Using the play or record timer

Using the timers

Setting the clock

This is a 24-hour clock.

1 Press [CLOCK / TIMER] to select “CLOCK”.

Each time you press the button:

CLOCK ˚ PLAY ˚ REC

Original display

2 ( Within 8 seconds or so )

Press [4 , / REW] or [¢ , / FF] to set the time.

3 Press [CLOCK / TIMER] to finish setting the time.

Displaying the clock

Press [CLOCK / TIMER] once when the unit is on or in standby mode.

The time is displayed for a few seconds.

Note:

Reset the clock regularly to maintain accuracy.

Using the play or record timer

You can set the timer to come on at a certain time to wake you up (play timer) or to record from the radio or the portable audio equipment (record timer).

Play timer and record timer cannot be used together.

Turn the unit on and set the clock.

Timer	Action
Play timer	Prepare the music source you want to listen to;
	cassette, disc number (1 to 5), radio or other
	equipments, and set the volume.
Record	Check the cassette’s erasure prevention tabs
timer	(\ page 12), insert the cassette and tune to the
	radio station (\ page 13) or select the music port
	source (\ page 16).

1 Press [CLOCK/TIMER] to select the timer function.

Each time you press the button:

CLOCK ˚ PLAY ˚ REC

Original display

˚PLAY : to set the play timer

˚REC : to set the record timer

(Proceed to the next step within 8 seconds )

2 Press [4 , / REW ] or [¢ , / FF] to set the starting time.

Start time

		Play timer indicator		Record timer indicator
3	Press [CLOCK / TIMER] to confirm.
4	Repeat steps 2 to 3 to set the finishing time.
			Finish time

RQTV0286

To activate the timer

5 Press [ ˚PLAY/REC] repeatedly to turn on your desired timer.

˚PLAY ˚ REC no display (off)

6 Press [y] to turn off the unit.

The unit must be off for the timers to operate.

Other basic operations

To	Action
Change the	Repeat steps 1 to 4 and 6 (\ see left and
settings	above).
Change the	1) Press [ ˚PLAY/REC] to clear the timer
source or	indicator from the display.
volume	2) Make changes to the source or volume.
	3) Perform steps 5 to 6 (\ see above).
Check the	Press [CLOCK/TIMER] repeatedly to select
settings	˚PLAY or ˚REC.
Cancel	Press [ ˚PLAY/REC] to clear the timer
	indicators from the display.

If you use the unit after the timers are set

After using, check that the correct tape or disc are loaded before turning the unit off.

Note:

•The play timer will start at the preset time with volume increasing gradually to preset level.

•The record timer will start 30 seconds before the set time with the volume muted.

•The timer comes on at the set time every day if the timer is on.

•The unit must be in the standby mode for the timer to function.

•If you turn the unit off and on again while a timer is functioning, the fi nish time setting will not be activated.

•If MUSIC PORT or OPTION port or USB is selected as the source when the play timer comes on, the system turns on and engages MUSIC PORT or OPTION port or USB as the source. If you wish to record from the portable audio equipment, just activate the portable audio equipment’s play mode and increase the volume. (See the other equipments’ instruction manual.)

Using the sleep timer

This function enables you to turn off the unit automatically after the set time.

Press [-SLEEP, –AUTO OFF] to select your desired time.

30 MIN 60 MIN 90 MIN 120 MIN OFF

Sleep timer indicator

To cancel

Press [-SLEEP, –AUTO OFF] to select “OFF”.

Changing the remaining time

Press [-SLEEP, –AUTO OFF] to show the remaining time and press [-SLEEP, –AUTO OFF] again to select your desired time.

Note:

•The play and sleep timer or the record and sleep timer can be used together.

•The sleep timer always has priority. Be sure not to overlap timer settings.

14