Set-up
Connect the AC power supply cord only after all other connections have been made.
Preparation
Twist and pull off the vinyl tip of the antenna wires and speaker cords.
(R)
4 AC power supply cord
Note
The included AC power supply cord is for use with this unit only.
Do not use it with other equipment.
For your reference
Information you enter into the unit’s memory, except for time, remains intact for up to a week after the AC power supply cord is disconnected.
2 AM loop antenna
Stand the antenna up |
on its base. |
(L)
1 FM indoor antenna
Adhesive tape
Affix where reception is best.
3 Speakers
Placement
Speakers are designed identically so that no left or right channel orientation is necessary.
Note
•Keep your speakers at least 10 mm (13/32˝) away from the system for proper ventilation.
•These speakers do not have magnetic shielding. Do not place them near televisions, personal computers or other devices easily influenced by magnetism.
•You cannot take the front net off the speakers.
External unit (optional)
R L
(R) 
(L)
Analog player (not included)
4
Connection
Black | Red | Connect the left (L) | Use only the supplied speakers. |
| The combination of the main unit and | ||
|
| side in the same way. | |
|
| speakers provide the best sound. Using | |
|
|
| |
|
|
| other speakers can damage the unit and |
|
|
| sound quality will be negatively affected. |
3 
Red (+)
12
Black
Caution
•Use the speakers only with the recommended system. Failure to do so may lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if you experience a sudden change in performance.
•Do not attach these speakers to walls or ceilings.
•An analog player with a
•For details, refer to the instruction manual of the units which are to be connected.
•When units other than those described above are to be connected, please consult your audio dealer.
RQT7528
