Panasonic SC-AK230, SC-AK333 Program play, Repeat play, Marking a track, Discs

Discs

DISC

PROGRAM

REPEAT

DEL

L, CLEAR

ALBUM ( or )

INTRO

H.BASS

MARKER

Numbered buttons

:/J, CD

CURSOR ( or ), g, REW/3,

f, 4/FF

ENTER

TITLE SEARCH

•To check program contents

Press [g, REW/3] or [f, 4/FF]. Every time you press the button:

CD The track number and program order are displayed:

AK330 AK333

Track number Program order

AK230

MP3 Program order is displayed, then album number and track number.

Program play
	CD	MP3

You can program up to 24 tracks.

Remote control only

CD

Preparation: Press [:/J, CD] and then [L, CLEAR].

1Press [PROGRAM].

“PGM” appears.

2Press [DISC] and then [1]–[5] to select the disc.

3Select the tracks with the numbered buttons.

To select a 2-digit track, press [>10] once then the two digits. Repeat steps 2 and 3 to program other tracks.

4Press [:/J, CD] to start play.

MP3

Preparation:

1.Press [DISC] and then [1]–[5] to select the disc.

2.Press [L, CLEAR].

1Press [PROGRAM].

“PGM” appears.

2Press [ALBUM ( or )] to select the album.

To select an album directly, press the numbered buttons

after pressing [ALBUM ( or )].

To select a 2-digit album, press [>10] once then the two digits. To select a 3-digit album, press [>10] twice then the three digits.

3Press [g, REW/3] or [f, 4/FF] to select the track.

To select a track directly, press the numbered buttons after pressing [g, REW/3] or [f, 4/FF].

To select a 2-digit track, press [>10] once then the two digits. To select a 3-digit track, press [>10] twice then the three digits.

4Press [ENTER].

Repeat steps 2 ~ 4 to program other tracks.

5Press [:/J, CD] to start play.

To exit program mode

Press [PROGRAM] in the stop mode. (You can replay your program by pressing [PROGRAM] then [:/J, CD].)

You can do the following while “P” is displayed

AK330 AK333

AK230

8

•To add to the program CD Do steps 2 and 3.

MP3 Do steps 2 ~ 4.

•To clear the last track Press [DEL].

•To clear all tracks Press [L, CLEAR].

While “CLEAR ALL” is blinking, press the button again to clear all tracks.

Note

•You cannot program CD-DA together with MP3 tracks.

•MP3 The program memory is cleared when you change a disc or open the disc tray.

•MP3 You cannot program more than one disc for MP3.

Repeat play
	CD	MP3

Remote control only

Press [REPEAT] during play.

“” is displayed.

To cancel repeat play

Press [REPEAT] to clear “” .

Note

You can use repeat mode with program play (A see left) and Play Mode (A page 7) functions.

Marking a track
	CD	MP3

You can mark one track each on the discs loaded so that you can start play from them later.

Remote control only

To mark a track

1During play or stop

Select your desired track.

(A page 6, “Basic play – Skip/Search”).

2Hold down [MARKER] until “STORING” blinks on the display.

The selected track is stored in the marker of the current disc.

Note

If a track is already stored in the marker, it will be replaced next time you store a new track in the same marker.

To recall a marked track number in the current disc

During play or stop

Press [MARKER] to recall a marker.

Play starts from the track recalled.

Note

•“NO MARKER” indicates that the marker in the current disc is empty.

•The marker memory is cleared when you open the disc tray.

•You cannot use this function during program play or random play.

RQT7790