Panasonic SC-BTT105, SC-BTT405, SC-BTT465 Speaker installation option, Attaching to a wall

Speaker installation option

Consult a qualified building contractor when attaching the speakers to a wall. Improper attachment may result in damage to the wall and speakers and personal injury.

Attaching to a wall

You can attach all of the speakers (except subwoofer) to a wall.

≥The wall or pillar on which the speakers are to be attached should be capable of supporting 10 kg per screw.

1 Drive a screw (not supplied) into the wall.

A At least 30 mm		
B ‰ 4.0 mm
C ‰ 7.0 mm to			
‰ 9.4 mm
D Wall or pillar	
E 5.5 mm to 7.5 mm		

2 Fit the speaker securely onto the screw(s) with the hole(s).

e.g., [BTT465] [BTT405] Surround speaker

DO NOT	DO
≥ In this position, the	≥ Move the speaker so
speaker will likely fall if	that the screw is in this
moved to the left or right.	position.

Screwing positions on the wall

Use the measurements indicated below.

≥Leave at least 20 mm of space above the speaker and 10 mm on each side to allow enough space for fitting the speaker.

[BTT465] [BTT405] CENTER

A14 mm

B	65 mm	
C	175 mm





[BTT465] FRONT

Attach to a wall without the base and the stand.

≥Before using the speaker cable, remove it from the stand by pulling it out.

D 45 mm
E 53 mm	
F 266 mm
		



≥Reattaching the speaker cable to the stand

Straighten the cable and run through the stand. Pull out the cable through the hole.

160 mm

[BTT465] SURROUND

[BTT405] FRONT, SURROUND

[BTT105] FRONT

G42 mm

H 45 mm	
	

32 VQT5F59