16
RQT9742
Attaching the unit to a wall (optional)
∫Supplied accessories
≥1 Safety holder
≥1 Screw
≥2 Wall mount brackets
∫Commercially available accessories
(not supplied)
≥4 Wall mount bracket fixing screws
≥1 Safety holder fixing screw
≥1 Fall prevention cord
≥1 Screw eye
Use screws with a nominal diameter of 4 mm (5/32q), which
are suitable to the material of the wall (e.g., wood, steel,
concrete, etc.)
1Detach the stand from the unit.
{. Unscrew the fixing screw (2 pieces) at the bottom of
the unit.
{. Gently pull the stand off the unit as illustrated.
≥Keep the removed screws and stand in a safe
place.
2Measure and mark the position of the wall
mount brackets (Both sides).
{. Use figures below to identify the screwing positions.
The position to attach the wall mount brackets
Space required
Installation accessories
≥Keep the safety holder out of reach of children to
prevent swallowing.
≥Keep the screws out of reach of children to
prevent swallowing.
≥Keep the wall mount brackets out of reach of
children to prevent swallowing.
Safety precautions
Professional installation is required.
The installation should never be done by any
other than a qualified installation specialist.
PANASONIC DISCLAIMS ANY PROPERTY
DAMAGE AND/OR SERIOUS INJURY,
INCLUDING DEATH RESULTING FROM
IMPROPER INSTALLATION OR INCORRECT
HANDLING.
≥Be sure to install this unit as indicated
within this Owner’s Manual.
Wall mount instructions
Before installation, turn the unit off and disconnect
the AC power supply cord from the AC outlet.
Bottom of the unit
Stand
Soft blanket or cloth
Fixing screw
202 mm (8q)
12.5 mm (1/2q)
300 mm (11 13/16q)
232 mm (9 7/8q)
700 mm (27 1/2q)
66 mm
(2 5/8q)
202 mm (8q)
125 mm (4 7/8q)
143 mm
(5 5/8q)
500 mm (19 5/8q)
118 mm
(4 5/8q)
30 mm
(1 1/8q)
SC-HC38~RQT9742.book Page 16 Tuesday, December 11, 2012 2:20 PM