4
RQT9742
Control reference guide
1Standby/on switch [Í/I] (Í)
Press to switch the unit from on to standby mode or
vice versa.
In standby mode, the unit is still consuming a small
amount of power.
2Select the audio source
On the remote control
[iPod]: “IPOD_DOCK” ,. “IPOD_PORT”
[CD/RADIO]: “CD” ,. “FM”
[]: “BLUETOOTH”
On this unit:
“CD” -. “FM” -. “BLUETOOTH” -. “IPOD_DOCK”
^--------------------- “IPOD_PORT” (----------------b
3Basic playback control buttons
4Enter setup menu
5Enter the iPod®/iPhone® menu /
Change displayed information
6Open or close the sliding door
7Adjust the volume (0 (min) to 50 (max))
8Mute the sound
Mutes the sound. Press again to cancel.
“MUTE” is also canceled when the volume is adjusted
or the unit is turned off.
9Enter playback menu
10 Enter sound menu
11 Selection/OK
12 “IPOD_PORT” for iPod/iPhone/iPad® (l6)
13 Dynamic Bass sound effect selector
14 Power on indicator
15 Display
16 Sliding door
17 Remote control signal sensor
Distance:
Within approx. 7 m (23 ft) directly in front.
≥To avoid interference, please do not put any objects
in front of signal sensor.
Unless otherwise indicated, operations are
described using the remote control.
SELECTOR
iPad
12
13673216
14
15 16 17
CD/
RADIO
Top view
∫Before using for the first time
Remove the insulation sheet A.
∫To replace a button-type battery
Battery type: CR2025 (Lithium battery)
≥Set the button-type battery with its (i) mark
facing upward.
≥Keep the button-type battery out of reach of
children to prevent swallowing.
SC-HC38~RQT9742.book Page 4 Tuesday, December 11, 2012 2:20 PM