17
RQT9756
∫Manual tuning and presetting
Select a radio broadcast.
1Press [PLAYMENU] repeat edly to select
“TUNEMODE”.
2Press [3,4] to select “MANUAL” and then press
[OK].
3Press [:/6] or [5/9] to tune to the
required station.
≥To start automatic tuning, press and hold [:/6],
[5/9] until the frequency starts scrolling. Tuning
stops when a station is found.
To preset the channel
4While listening to the radio broadcast
Press [OK].
5Press [3,4] to select the channel and then press
[OK].
∫To improve FM sound quality
1While receiving FM broadcasts, press
[PLAYMENU] repeatedly to select “FM MODE”.
2Press [3,4] to select “MONO” and then press
[OK].
≥This setting can be preset and memorised. To do so,
continue to step 4 of “Manual tuning and presetting”.
≥Select “STEREO” in step 2 to return to stereo broadcasts.
≥“MONO” is cancelled if the frequency is changed.
≥“STEREO” is displayed when this unit tunes to a stereo
broadcast.
≥If “MONO” is selected, regardless of the type of signal this
unit is receiving, “FM MONO” is displayed. (lbelow)
∫To display the current FM signal status
While receiving FM broadcast, press [DISPLAY].
“FM ST”: The FM signal is in stereo.
“FM”: The FM signal is in monaural.
≥“FM” is also displayed even if this unit is not tuned to a
station.
SC-HC58DBEB_DBGN_GS~RQT9756-B.book 17 ページ ２０１３年１月２９日　火曜日　午前１０時１２分