14 RQT9660
≥For a safety measure to prevent the speakers from falling, refer to page 17.
≥To prevent damage or scratches, lay down a soft cloth and perform the assembly on it.
Assemble the speakers following steps 1 and 2 of “Place the speakers
horizontally” (>10).
Attach the stands.
≥Use the “Panasonic” logo to identify the top and bottom of the speaker.
≥Keep the screws out of reach of children to prevent swallowing.
When placing the speakers on a table
Place the speakers using the stands
∏2 Speakers ∏2 Speaker cables
(L): WHITE
(R): RED
∏1 Speaker joint
∏2 Stands ∏6 Screws
AScrew (supplied)
BScrew hole
Align the holes with the projecting parts on the speaker.
≥Do not use the lower holes for the alignment. If these holes
are used, the screw does not fit.
SC-HTB550_RQT9660_mst.book Page 14 Tuesday, December 20, 2011 1:55 PM