Before use
RQT9660 7
1 Turn the main unit on or off (>23)
2 Adjust the dialog effect level (>23)
3 Adjust the output level of the active subwoofer
(bass sound) (>23)
4 Adjust the volume of this system (>23)
5 Mute the sound (>23)
6 Select the TV as the source (>23)
7 Select the Bluetooth® device as the source
(>23)
8 Select the input source (>23)
“TV”#“BD/DVD” #“AUX1”
^--- “”(-- “AUX2”(}
Remote control
DIALOG LEVEL
LINK MODE
PAIRING
----
1
6
7
2
3
4
5
8
INPUT
SELECTOR
Remove the insulation sheet A before using.
∫To replace a button-type battery
1While pressing the stopper B, pull out the
battery holder.
2Set the button-type battery with its (i) mark
facing upward and then put the battery
holder back in place.
≥When replacing the battery, use:
CR2025 (Lithium battery)
≥Keep the button-type battery out of reach of
children to prevent swallowing.
∫Remote control operation range
The remote control signal sensor is located on the main unit.
≥Use the remote control within the correct operation range.
C Remote control signal sensor
≥Operation range
Distance: Within approx. 7 m
(23 ft) directly in front
Angle: Approx. 30oleft and right
SC-HTB550_RQT9660_mst.book Page 7 Tuesday, December 20, 2011 1:55 PM