Getting started
RQT9660 11
Connect the speaker cables.
≥Use the “Panasonic” logo to identify the left and right speakers, then connect the cables (as illustrated).
≥Insert the wire fully, taking care not to insert beyond the wire insulation.
Drive a screw into the wall.
≥Use the measurements indicated below to identify the screwing positions on the wall.
≥Leave at least 20 mm (25/32q) of space above and on each side of the speaker to allow enough space for fitting the
speaker.
≥The position on the wall where the screw is to be attached, as well as the screw, should be capable of supporting over
33 kg (72.8 lbs).
≥Keep the screws out of reach of children to prevent swallowing.
1Insert the wire
fully.
r: White
s: Blue line
2Press into the
groove.
ARED: Right speaker channel (R)
BWHITE: Left speaker channel (L)
CAt least 30 mm (1 3/16q)
D‰4.0 mm (5/32q)
E‰7.0 mm to ‰9.4 mm (9/32q to 3/8q)
FWall or pillar
G5.5 mm to 6.5 mm (7/32q to 1/4q)
H326 mm (12 27/32q)I316 mm (12 7/16q)J316 mm (12 7/16q)K26 mm (1 1/16q)
LWall mounting hole
White
Red
Push
Front view (semi-transparent image)
SC-HTB550_RQT9660_mst.book Page 11 Tuesday, December 20, 2011 1:55 PM