Panasonic SC-NT10 Listening to audio from a Bluetooth device, Connecting via Bluetooth menu

Listening to audio from a Bluetooth® device

Preparation

While charging this unit or after charging this unit, turn on the Bluetooth® feature of the device and place the device near this unit.

If you intend to use an NFC (Near Field Communication)-compatible Bluetooth® device, proceed to “One-Touch Connection (Connecting by NFC)” (> 9).

Connecting via Bluetooth® menu

For each Bluetooth® device you want to connect to via Bluetooth®, perform pairing first.

∫Pairing with Bluetooth® device

1Press [Í/I] to turn this unit on.

•The Bluetooth® indicator (blue) blinks slowly.

•If this unit is being used for the first time (factory preset state):

The Bluetooth® indicator (blue) blinks fast. → The unit will enter pairing standby. → Skip to step 3.

2Press and hold [ ] until the Bluetooth® indicator (blue) blinks fast.

•The unit will enter pairing standby.

3Select “SC-NT10” from the Bluetooth® device’s Bluetooth® menu.

•When the Bluetooth® device is paired and connected, the Bluetooth® indicator (blue) on the unit lights up.

•If prompted for a passkey, input “0000”.

•If the Bluetooth® device need to operate the Bluetooth® pairing setting and the Bluetooth® connecting setting, operate both settings.

4Start playing back music, a movie, etc. on your Bluetooth® device.

•Adjust the volume using the [VOL -/VOL +] buttons on the unit.

When the maximum or minimum volume is reached, you will be notified by a beep sound.

∫Listening to audio from a paired device

When this unit is turned on, the Bluetooth® indicator (blue) will blink slowly indicating that the unit is in connection standby mode. Please perform Steps 3 and 4.

•When the power is turned on, this unit is connected to the last-used Bluetooth® device. At this point, please perform Step 4.

8 VQT5A86