Cautions:
•Avoid using the USB device if it might hinder your safety driving.
•Do not pull out and attach the USB device repeatedly while “READING” is shown on the display.
•Do not start the car engine if a USB device is connected.
•This unit may not be able to play the files depending on the type of USB device.
•Operation and power supply may not work as intended for some USB devices.
•You cannot connect a computer to the USB input terminal of the unit.
•Make sure all important data has been backed up to avoid losing the data.
•Do not leave a USB device in the car, expose to direct sunlight, or high temperature to avoid deformation or cause damages to the device.
•Some USB devices may not work immediately after attaching USB device or turn on the power.
•For more details about USB operations, 
27, 28.
Using Bluetooth® devices
For Bluetooth operations, it is required to connect the Bluetooth adapter,
•Refer to pages i and ii at the end of the manual to check the countries where you may use the Bluetooth® function.
•For details, refer also to the instructions supplied with the Bluetooth adapter and the Bluetooth device.
To use a Bluetooth device through the unit
•Once the connection is established, it is registered on the unit even if you reset your unit. Up to five devices can be registered in total.
•Only one device can be connected at a time for each source
Registration (Pairing) methods
Use either of the following items (“OPEN” or “SEARCH” ) in the Bluetooth menu to register and make the unit ready to establish a new Bluetooth connection with a device.
“OPEN” : Connection is established by operating the Bluetooth device.
“SEARCH” : Connection is established by operating the unit.
Registering using “OPEN”
Preparation: Operate the device to turn on its Bluetooth function.
1
]
2
]“NEW DEVICE” ] “OPEN”
3
]Enter a PIN (Personal Identification Number) code in to the unit.
You can enter any number you like
• Some devices have their own PIN code. Enter the specified PIN code in to the unit.
ENGLISH
11
