Listening to the satellite radio

Before operating, connect either one of the following systems (not supplied) to the expansion port on the rear of this unit.

For listening to a SIRIUS Satellite radio:

SC-C1 and KS-SRA100

PnP, SC-VDOC1 and KS-SRA100

For listening to an XM Satellite radio:

JVC Smart Digital Adapter (XMDJVC100)

CNP2000UC and CNPJVC1

For details, refer also to the instructions supplied with the other components.

GCI (Global Control Information) update

If channels are updated after subscription, updating starts automatically. “UPDATING” flashes and no sound can be heard.

Update takes a few minutes to complete.

During update, you cannot operate your satellite radio.

~

]“SIRIUS” or “XM”

Ÿ

]Select a category.

SIRIUS: If you select “ALL,” you can tune in to all the channels of all categories.

!

]Select a channel to listen. Holding the button changes the channels rapidly.

While searching, invalid and unsubscribed channels are skipped. XM: If you do not select a channel within 15 seconds, category selected in step Ÿ is canceled. You can select all channels of all categories now (including non-categorised channels).

Activate your SIRIUS subscription after connection

1

]“SIRIUS”

SIRIUS Satellite radio starts updating all the SIRIUS channels. Once completed, SIRIUS Satellite radio tunes in to the preset channel, CH184.

2Check your SIRIUS ID. ( 25)

3Contact SIRIUS on the internet at <http://activate.siriusradio.com/> to activate your subscription, or you can call SIRIUS toll-free at 1-888-539-SIRIUS (7474).

“SUB UPDT PRESS ANY KEY” scrolls on the display once subscription has been completed.

18

ENGLISH

Page 18
Image 18
JVC KD-R610, KD-A615, KD-R618 manual Listening to the satellite radio, GCI Global Control Information update, Sirius