JVC KD-R618 Numbers, and a limited number of symbols, Check the Bluetooth setting of the device

USB device playback

Bluetooth *2

Symptom		Remedy/Cause
Tracks/folders are not played	The playback order is determined by the write-in time
back in the order you have	stamp. The first track/folder written into the USB device
intended.	will be the first track/folder for playback.
• “CANNOT PLAY” flashes on	• Attach a USB device that contains tracks encoded in
the display.	an appropriate format.
• “NO USB” appears on the	• Reattach the USB device again.
display.
• The unit cannot detect the
USB device.
While playing a track, sound is	The MP3/WMA tracks have not been properly copied
sometimes interrupted.	into the USB device.
	Copy MP3/WMA tracks again into the USB device, and
	try again.
Correct characters are not	This unit can only display letters (upper case),
displayed (e.g. album name).	numbers, and a limited number of symbols.
Bluetooth device does not	The unit can be connected with one Bluetooth mobile
detect the unit.	phone and one Bluetooth audio device at a time.
	While connecting a device, this unit cannot be detected
	from another device. Disconnect currently connected
	device and search again.
The unit does not detect the	• Check the Bluetooth setting of the device.
Bluetooth device.	• Search from the Bluetooth device. After the device
	detects the unit, select “OPEN” on the unit to connect
	the device. (	13)
The unit does not make pairing	• Enter the same PIN code for both the unit and target
with the Bluetooth device.	device.
	• Select the device name from “SPECIAL,” then try to
	connect again. (	13)
	• Try to pair/connect from the Bluetooth device.
Echo or noise occurs.	Adjust the microphone unit position.
Phone sound quality is poor.	• Reduce the distance between the unit and the
	Bluetooth mobile phone.
	• Move the car to a place where you can get a better
	signal reception.

*2 For Bluetooth operations, refer also to the instructions supplied with the Bluetooth Adapter.

ENGLISH

37