32

 

Symptom

 

Remedy/Cause

 

 

 

 

 

• “CANNOT PLAY” flashes on

• Attach a USB device that contains tracks encoded in

 

the display.

an appropriate format.

 

 

• “NO USB” appears on the

• Reattach the USB device again.

 

playback

display.

 

 

 

USB device.

 

 

 

 

• The unit cannot detect the

 

 

 

device

 

 

 

 

While playing a track, sound is

The MP3/WMA tracks have not been properly copied

 

USB

sometimes interrupted.

into the USB device.

 

 

Copy MP3/WMA tracks again into the USB device, and

 

 

 

 

try again.

 

 

 

 

 

 

 

Correct characters are not

This unit can only display letters (upper case),

 

 

displayed (e.g. album name).

numbers, and a limited number of symbols. (

8)

 

 

 

 

Bluetooth device does not

The unit can be connected with one Bluetooth mobile

 

detect the unit.

phone and one Bluetooth audio device at a time.

 

 

 

While connecting a device, this unit cannot be detected

 

 

from another device. Disconnect currently connected

 

 

device and search again.

 

 

 

 

 

 

The unit does not detect the

• Check the Bluetooth setting of the device.

 

 

Bluetooth device.

• Search from the Bluetooth device. After the device

 

 

detects the unit, select “OPEN” on the unit to connect

 

 

the device. (

11)

 

 

 

 

 

The unit does not make pairing

• Enter the same PIN code for both the unit and target

 

with the Bluetooth device.

device.

 

 

2

 

• Select the device name from “SPECIAL,” then try to

 

connect again. (

12)

 

*

 

 

Bluetooth

 

• Try to pair/connect from the Bluetooth device.

 

 

 

 

 

 

 

 

 

Echo or noise occurs.

Adjust the microphone unit position.

 

 

 

 

 

 

Phone sound quality is poor.

• Reduce the distance between the unit and the

 

 

 

Bluetooth mobile phone.

 

 

 

• Move the car to a place where you can get a better

 

 

signal reception.

 

 

 

 

 

 

The sound is interrupted or

• Reduce the distance between the unit and the

 

 

skipped during playback of a

Bluetooth audio device.

 

 

Bluetooth audio device.

• Disconnect the device connected for “BT-PHONE.”

 

 

• Turn off, then turn on the unit.

 

 

 

• (When the sound is not yet restored,) connect the

 

 

device again.

 

 

 

 

 

 

The connected audio device

Check whether the connected audio device supports

 

cannot be controlled.

AVRCP (Audio/Video Remote Control Profile).

 

 

 

 

 

 

*2 For Bluetooth operations, refer also to the instructions supplied with the Bluetooth Adapter.

ENGLISH

Page 80
Image 80
JVC KD-R618 Display USB device Unit cannot detect, Echo or noise occurs Adjust the microphone unit position, Device again