Panasonic SC-PM200 operating instructions Placement, Foreign matter, Voltage

SAFETY PRECAUTIONS

Information for Users on Collection and Disposal of Old Equipment and used Batteries

2 PLACEMENT OF SPEAKERS

Operating Instructions

CD Stereo System

Model No. SC-PM200

Placement

Set the system up on an even surface away from direct sunlight, high temperatures, high humidity, and excessive vibration. These conditions can damage the cabinet and other components, thereby shortening the service life of the system.

Place it at least 15 cm away from wall surfaces to avoid distortion and unwanted acoustical effects.

Do not place heavy items on the system.

Foreign matter

Do not let metal objects fall inside the system. This can cause electric shock or malfunction.

Do not let liquids get into the system. This can cause electric shock or malfunction. If this occurs, immediately disconnect the system from the power supply and contact your dealer.

Do not spray insecticides onto or into the system. They contain flammable gases which can ignite if sprayed into the system.

These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points,

in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.

For business users in the European Union

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.

[Information on Disposal in other Countries outside the European Union]

These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or

The right and left speakers are the same.

Note:

• Keep your speakers more than 10 mm

from the main unit for ventilation.

• Put the speakers on a flat safe surface.

• These speakers do not have magnetic

shielding. Do not put them near TVs, PCs

or other equipment easily influenced by

magnetism.

• When you play at high levels for a long

period, it can cause damage to the system

and decrease the life of the system.

• Decrease the volume in these conditions to

prevent damage:

Dear Customer

Thank you for purchasing this system.

SUPPLIED ACCESSORIES

Voltage Service

By disposing of these products and batteries correctly, you will

dealer and ask for the correct method of disposal.

You cannot remove the net of the speakers.

Use only the supplied speakers.

– When you play distorted sound.

– When you adjust the sound quality.

For optimum performance and safety, read these instructions fully before you connect, operate or adjust this system.

Keep this manual for future reference.

Use numbers indicated in parentheses when asking for replacement parts. (Product numbers correct as of May 2011. These may be subject to change.)

1 x AC mains lead	1 x FM indoor antenna
(K2CZ3YY00005)	(RSAX0002)

Do not use high voltage power sources. This can overload the system and cause a fire.

Do not use a DC power source. Check the source carefully when setting the system up on a ship or other place where DC is used.

Do not attempt to repair this system by yourself. If sound is interrupted, indicators fail to light, smoke appears, or any other problem that is not covered in these instructions occurs, disconnect the AC mains lead and contact your dealer or an authorised service

help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling.

Note for the battery symbol (bottom two symbol examples):

This symbol might be used in combination with a chemical symbol. In this case it complies

The combination of the main unit and speakers give the best sound.

You can cause damage to the system and decrease the sound quality if you use other speakers.

These operating instructions are applicable to the following system.

System	SC-PM200
Main unit	SA-PM200
Speakers	SB-PM200

Your system and the illustrations can look differently.

Do the procedures with the remote control. You can also use the buttons on the main unit if they are the same.

1 x Remote control	1 x Antenna plug adaptor
(N2QAYB000639)	(K1YZ02000013)

1 x AM loop antenna (N1DYYYY00010)

AC mains lead protection

Ensure the AC mains lead is connected correctly and not damaged. Poor connection and lead damage can cause fire or electric shock. Do not pull, bend, or place heavy items on the lead.

Grasp the plug firmly when unplugging the lead. Pulling the AC mains lead can cause electric shock.

Do not handle the plug with wet hands. This can cause electric shock.

centre. Electric shock or damage to the system can occur if the system is repaired, disassembled or reconstructed by unqualified persons.

Extend operating life by disconnecting the system from the power source if it is not to be used for a long time.

For more information about collection and recycling of old products and batteries, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items.

Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

with the requirement set by the Directive for the chemical involved.

CAUTION!

•Use the speakers only with the recommended system. If not, you can cause damage to the amplifier and speakers and can cause a fire. Consult an approved service personnel if damage occurs or if there is a sudden apparent change in performance.

•Do the procedures included in these instructions when you attach the speakers.

3 MAKING THE CONNECTIONS

Conserving power

The system consumes approximately 0.2 W when it is in standby mode. Disconnect the power supply if you do not use the system.

CAUTION FOR AC MAINS LEAD

Some settings will be lost after you disconnect the system. You have to set them again.

For your safety, please read the following text carefully.

WARNING: DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH

1 PREPARING THE REMOTE CONTROL

2 Connect the FM indoor antenna.

Place the antenna where reception is

best.

Note:

“EB” on the packaging indicates the United Kingdom.

Panasonic Corporation		EB	En
Web Site: http://panasonic.net
Pursuant to at the directive 2004/108/EC, article 9(2)
Panasonic Testing Centre
Panasonic Marketing Europe GmbH	RQT9548-1B
Winsbergring 15, 22525 Hamburg, Germany	L0511LL1061

This appliance is supplied with a moulded three pin mains plug for your safety and convenience.

A 5-ampere fuse is fitted in this plug. Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 5-ampere and that it is approved by ASTA or BSI to BS1362.

Check for the ASTA mark or the BSI mark on the body of the fuse.

If the plug contains a removable fuse cover

IS MARKED WITH THE LETTER E, BY THE EARTH SYMBOL OR COLOURED GREEN OR GREEN/YELLOW.

THIS PLUG IS NOT WATERPROOF—KEEP DRY.

Before use

Remove the connector cover.

How to replace the fuse

The location of the fuse differ according to the type of AC mains plug (figures A and B). Confirm the AC mains plug fitted and follow

R6/LR6, AA (not included)

Use alkaline or manganese battery.

CAUTION!

• Do not break open or short-circuit the battery.

• Do not charge the alkaline or manganese

battery.

• Do not use the battery if the cover has peeled

off.

• Do not heat or expose to flame.

• Do not leave the battery(ies) in an automobile

exposed to direct sunlight for a long period of

time with doors and windows closed.

• Mishandling of battery can cause electrolyte

1			4	Using an outdoor antenna (optional)
				• Use FM outdoor antenna only if the
		2	3	radio reception is poor.
B				• Use the included antenna plug adaptor
			B	to connect the FM outdoor antenna.
A
	(6:)	(6:)		• The antenna should be installed by a
			A
			To household	competent technician.
				• Do not use the outdoor antenna during
	Black Red		mains socket
				a lightning storm.

you must ensure that it is refitted when the fuse is replaced.

If you lose the fuse cover the plug must not be used until a replacement cover is obtained.

A replacement fuse cover can be purchased from your local dealer.

CAUTION!

IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR THE SOCKET

the instructions below.

Illustrations may differ from actual AC mains plug.

1. Open the fuse cover with a screwdriver.

Figure A Figure B

Install the battery so that the poles

(+ and –) align with those in the remote control.

Point the remote control at the remote control sensor, away from obstacles, at a maximum range of 7 m directly in front of the main unit.

leakage, which can cause a fire.

• Remove the battery if you do not use the

remote control for a long period of time. Keep in

a cool, dark area.

Click!

1Connect the speakers.

Be careful not to cross (short-circuit) or reverse the polarity of the

3

4

Connect the AM loop antenna. Connect the AC mains lead.

READ THE CAUTION FOR AC MAINS LEAD BEFORE CONNECTION.

Use the included AC mains lead with this system only.

Do not use an AC mains lead from other equipment.

Back of product

Inside of product

OUTLET IN YOUR HOME THEN THE FUSE SHOULD BE REMOVED AND THE PLUG CUT OFF AND DISPOSED OF SAFELY.

Fuse cover

CAUTION!

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions.

speaker wires as doing so may damage the speakers.

WARNING:

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE,

•DO NOT EXPOSE THIS APPARATUS TO RAIN, MOISTURE, DRIPPING OR SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS.

•USE ONLY THE RECOMMENDED ACCESSORIES.

•DO NOT REMOVE THE COVER (OR BACK); THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION!

• DO NOT INSTALL OR PLACE THIS

UNIT IN A BOOKCASE, BUILT-IN

CABINET OR IN ANOTHER CONFINED

CAUTION!

THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL.

The socket outlet shall be installed near the equipment and easily accessible.

The mains plug of the power supply cord shall remain readily operable.

To completely disconnect this apparatus from the AC Mains, disconnect the power supply cord plug from AC receptacle.

This product may receive radio interference caused by mobile telephones during use.

THERE IS A DANGER OF SEVERE ELECTRICAL SHOCK IF THE CUT OFF PLUG IS INSERTED INTO ANY 13-AMPERE SOCKET.

If a new plug is to be fitted please observe the wiring code as stated below.

If in any doubt please consult a qualified electrician.

IMPORTANT

The wires in this mains lead are coloured in accordance with the following code:

Blue: Neutral, Brown: Live.

As these colours may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:

The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black or Blue. The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Brown or Red.

2.Replace the fuse and close or attach the fuse cover.

Figure A Figure B

Fuse (5 ampere) Fuse (5 ampere)

4	OVERVIEW OF CONTROLS
				Refer to the numbers in parentheses for chapter		I Set the sleep timer (8)
A	SLEEP	PLAY	I	references.		Set the clock and timer (8)
				A Standby/on switch [`], [1] (8, 13)		J Set the program function (5, 7)
									Q
					Press to switch the unit from on to standby mode	K Adjust the volume of the system
			J					Top view	MUSIC P.
					or vice versa. In standby mode, the unit is still				R
						L Mute the sound of the system
B					consuming a small amount of power.
			K	B	Numeric buttons [1 to 9, 0, ≧10]	Press the button again to cancel.
						“MUTE” is also cancelled when you adjust the
					To select a 2-digit number
						volume or when you switch off the system.
C			L		Example: 16: [≧10] → [1] → [6]
						M Set the play menu item (5)
D			EXT-IN	C	Delete a programmed track (5)				S
			RADIO			N Set the radio menu item (7)
				D Select source
						O [R, T]: Skip album
					[USB]: Select USB (6)		W		E
E					[CD]: Select disc (5)	Adjust clock setting
					[RADIO, EXT-IN] / [RADIO/EXT-IN]:	[Y, U]: Select the item in the menu
					Select radio, USB or music port (7, 10, 11)	[OK]: Confirm the setting			F

SPACE. ENSURE THE UNIT IS WELL

VENTILATED. TO PREVENT RISK OF

ELECTRIC SHOCK OR FIRE HAZARD

DUE TO OVERHEATING, ENSURE

THAT CURTAINS AND ANY OTHER

MATERIALS DO NOT OBSTRUCT THE

VENTILATION VENTS.

• DO NOT OBSTRUCT THE UNIT’S

VENTILATION OPENINGS WITH

NEWSPAPERS, TABLECLOTHS,

CURTAINS, AND SIMILAR ITEMS.

• DO NOT PLACE SOURCES OF

NAKED FLAMES, SUCH AS LIGHTED

CANDLES, ON THE UNIT.

• DISPOSE OF BATTERIES IN AN

ENVIRONMENTALLY FRIENDLY

MANNER.

If such interference is apparent, please increase separation between the product and the mobile telephone.

THIS UNIT IS INTENDED FOR USE IN MODERATE CLIMATES.

MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.

Sales and Support Information

Customer Care Centre

•For customers within the UK: 0844 844 3852

•For customers within Ireland: 01 289 8333

•Visit our website for product information www.panasonic.co.uk

•E-mail: customer.care@panasonic.co.uk

Direct Sales at Panasonic UK

•For customers: 0844 844 3856

•Order accessory and consumable items for your product with ease and confidence by phoning our Customer Care Centre Monday–Thursday 9:00 a.m.– 5:30 p.m., Friday 9:30 a.m.– 5:30 p.m. (Excluding public holidays).

•Or go on line through our Internet Accessory ordering application at www.pas-europe.com.

•Most major credit and debit cards accepted.

•All enquiries transactions and distribution facilities are provided directly by Panasonic UK.

•It couldn’t be simpler!

•Also available through our Internet is direct shopping for a wide range of finished products, take a browse on our website for further details.

F		D.BASS	SOUND PRESET EQ			E Basic operation	P Automatically switch off the system		A
						[4/9]: Playback or pause operation		This function switches off the system (except in	D
					M	[8]: Stop playback		radio source) if you do not use the system for		K
						[2], [6]: Skip track		approximately 30 minutes.
G					N	Select preset radio station		To cancel, press the button again.	E	T
						[3], [5]: Search track	Q	Music port jack (10)
					O	Tune in to the radio station
	DISPLAY							Headphones jack ( ) (10)
				AUTO OFF		[2/3], [5/6]:Skip and search track	R
	DIMMER									U
H					P	Select preset radio station	S	Display panel		V
						F Select the sound effects (9)	T	USB port ( ) (6)
						G Auto preset the radio station (7)
							U	Open or close the disc tray
						H View the information shown on the display panel
							V	Disc tray
						Decrease the brightness of the display panel
							W Remote control sensor
						Press and hold the button to use this function.
						To cancel, press and hold the button again.