840144101 ENv03.qxd:840144100 ENv01.qxd
10/29/08 4:18 PM Page 7
Cleaning the Air Purifier (cont.)
The Air Quality Sensor (select models only)
The air quality sensor is a rectangular compartment located on the side of the air purifier. It contains both the sensor/sensor lens and the sensor cleaner (see Fig. 1). The sensor cleaner is soft and specially shaped to fit inside the sensor/sensor lens area. Monthly cleaning of the sensor/sensor lens is recommended.
Fig. 1
Sensor/Sensor Lens
Cleaning the Sensor/
Sensor Lens:
1.Open the compartment door and remove the sensor cleaner. If sensor cleaner is difficult to grasp, pull on the black ribbon underneath to help release it.
2.Holding one end of the sensor clean- er, push the piece in and out of the sensor/sensor lens opening several times. This will clean the area.
3.Slide the sensor cleaner back into its storage compartment and close the air quality sensor door. Make sure the compartment door is fully closed or the air purifier may not operate properly.
Sensor Cleaner
To Order Replacement Parts
Purifier | Control | Room Size* | HEPA |
Model | Type | (sq. ft.) | Filter |
|
|
|
|
04491 | AirSmart | 180 | 04993 |
|
|
|
|
*Each air purifier is designed to filter the room air five times per hour at high speed. Factors such as room shape and ceiling height can affect this rate. It is normal that the air flow will be reduced as the filter becomes clogged. Replace the HEPA filter as needed.
To order replacement filters, call Customer Service
1-800-851-8900 (US)
Or online:
trueair.com
hamiltonbeach.com
7
