RQTV0160
Timer
Setting the clock
This is a
1 Press [CLOCK/TIMER] to select “CLOCK”.
Each time you press the button:
CLOCK ˚ PLAY Original display
2 Within 5 seconds, press [/4] or [/¢] to set the time.
3 Press [CLOCK/TIMER] again to confirm.
Displaying the clock
Press [CLOCK/TIMER] to display the clock for few seconds.
Note
The clock may lose or gain minutes over a period of time. Readjust as necessary.
Using the sleep timer
This function enables you to turn off the unit automatically after the set time.
Press [SLEEP] repeatedly to select your desired time.
Sleep timer indicator
To cancel
Press [SLEEP] to select “OFF”.
Changing the remaining time
Press [SLEEP] to show the remaining time, and press [SLEEP] again to select your desired time.
Using the play timer
You can set the play timer to come on at a certain time to wake you up.
Preparation
Turn the unit on and set the clock.
Prepare the music source you want to listen to; disc, radio or music port source, and set the volume.
1 | Press [CLOCK/TIMER] repeatedly to select play | ||||||||
| timer. |
|
|
|
|
|
| ||
2 |
|
| CLOCK |
| ˚ PLAY |
| Original display |
|
|
|
|
|
|
| |||||
|
|
|
|
|
| ||||
Within 5 seconds, press [ /4] or [ /¢] to set the | |||||||||
| starting time. |
|
|
|
|
|
|
Start time
| Play timer indicator | ||
3 | Press [CLOCK/TIMER] to confirm. | ||
4 | Repeat steps 2 and 3 to set the finishing time. | ||
|
| Finish time | |
|
|
|
|
|
|
|
|
To activate the timer
5 | Press [˚PLAY] to turn on the timer. |
| “˚PLAY” is displayed. |
6 | Press [y] to turn off the unit. |
| The unit must be off for the timer to operate. |
Other basic operations
To | Action | |
change the settings | Repeat steps 1 to 4 and 6. | |
|
|
|
change the source | 1) | Press [˚PLAY] to clear the ˚PLAY |
or volume |
| indicator from the display. |
| 2) | Make changes to the source or volume. |
| 3) | Perform steps 5 and 6. |
|
| |
check the settings | Press [CLOCK/TIMER] repeatedly to select | |
(when the unit is on | ˚PLAY. | |
or in standby mode) |
|
|
|
| |
cancel | Press [˚PLAY] to clear the timer indicator | |
| from the display. | |
|
|
|
Note
•The timer will start at the preset time, with the volume increasing gradually to the preset level.
•The timer comes on at the set time every day if the timer is on.
•The unit must be in the standby mode for the timer to function.
•If you turn the unit off and on again while a timer is functioning, the fi nish time setting will not be activated.
•If MUSIC PORT is selected as the source when the timer comes on, the system turns on and engages MUSIC PORT as the source. If you wish to playback from the portable audio equipment, activate the equipment’s play mode and increase the volume. (See the portable audio equipment’s instruction manual.)
12 |
| Note |
|
• | The play and sleep timer can be used together. | ||
| • | The sleep timer always has priority. Be sure not to overlap timer settings. |