Using the timer
Setting the clock
This is a
1Press [CLOCK/TIMER] to select “CLOCK”. Each time you press the button:
CLOCK 
zPLAY
Original display 
2Within 5 seconds, press [u/t] or [y/i] to set the time.
3Press [CLOCK/TIMER] again to confirm.
Displaying the clock
Press [CLOCK/TIMER] to display the clock for a few seconds.
Note
The clock may lose or gain minutes over a period of time. Readjust as necessary.
Using the play timer | PLAY |
You can set the timer to come on at a certain time to wake you up.
Preparation
•Turn the unit on and set the clock.
•Prepare the music source (disc, radio, USB or iPod source) and set the volume.
1Press [CLOCK/TIMER] repeatedly to select play timer.
CLOCK 
zPLAY
Original display 
2Within 5 seconds, press [u/t] or [y/i] to set the starting time.
To activate the timer
5Press [z, PLAY] to turn on play timer.
zPLAY
No display (off)
6Press [^] to turn off the unit.
ToAction
change the | Repeat steps 1 to 4 and 6. | |
settings |
|
|
|
|
|
change the | 1) | Press [z, PLAY] to clear the timer |
source or |
| indicator from the display. |
volume | 2) | Make changes to the source or |
|
| volume. |
| 3) | Perform steps 5 and 6. |
|
| |
check the | Press [CLOCK/TIMER] repeatedly to | |
settings (when | select zPLAY. | |
the unit is on |
|
|
or in standby |
|
|
mode) |
|
|
|
| |
cancel | Press [z, PLAY] to clear the timer | |
| indicators from the display. | |
|
|
|
Note
•The play timer will start at the preset time, with the volume increasing gradually to the preset level.
•The timer comes on at the set time every day if the timer is on.
•The unit must be in the standby mode for the timer to function.
•If you turn the unit off and on again while a timer is functioning, the finish time setting will not be activated.
Using the sleep timer
This function enables you to turn off the unit automatically after the set time.
Press [SLEEP] repeatedly to select your desired time.
ENGLISH
Start time
Play timer indicator
3Press [CLOCK/TIMER] to confirm.
4Repeat steps 2 and 3 to set the finishing time. Finish time
Sleep timer indicator
To cancel
Press [SLEEP] to select “OFF”.
Changing the remaining time
Press [SLEEP] to show the remaining time, and press [SLEEP] again to select your desired time.
Note
The play and sleep timer can be used together. The sleep timer always has priority. Be sure not to overlap timer settings.
RQTX0215
11
