Panasonic SC-PM54 Sound adjustment, Timer Continued, Selecting sound effects, Preset EQ

RQTV0102

12

Timer (Continued)		Sound adjustment
Other basic operations
To	Action
change the settings	Repeat steps 1 to 4 and 6 on page 11.
change the source	1) Press [˚PLAY/REC] to clear the timer
or volume	indicator from the display.
	2) Make changes to the source or volume.
	3) Perform steps 5 and 6 on page 11.
check the settings	Press [CLOCK/TIMER] repeatedly to
(when the unit is on	select ˚PLAY or ˚REC.
or in standby mode)
cancel	Press [˚PLAY/REC] to clear the timer
	indicators from the display.
Note
• The play timer and record timer cannot be used together.
• The play timer will start at the preset time, with the volume
increasing gradually to the preset level.
• The record timer will start 30 seconds before the set time with the
volume muted.
• The timer comes on at the set time every day if the timer is on.
• The unit must be in the standby mode for the timer to function.

•If you turn the unit off and on again while a timer is functioning, the fi nish time setting will not be activated.

•If MUSIC PORT is selected as the source when the timer comes on, the system turns on and engages MUSIC PORT as the source. If you wish to playback or record from the portable audio equipment, activate the equipment’s play mode and increase the volume. (See

the portable audio equipment’s instruction manual.) Selecting sound effects

You can change the sound effect by selecting Preset EQ or adjusting the bass or treble effect.

Preset EQ

Press [PRESET EQ] repeatedly to select your desired setting.

HEAVY → CLEAR → SOFT → VOCAL → EQ-OFF

Setting	Effect
HEAVY	Adds punch to rock
CLEAR	Clarifies higher frequencies
SOFT	For background music
VOCAL	Adds gloss to vocal
EQ-OFF	No effect

Bass or treble

Enable you to enjoy the lower or higher pitch sound.

1 Press [BASS] or [TREBLE] to select your desired setting.

Setting	Effect
BASS	For lower pitch sound
TREBLE	For higher pitch sound

2 Press [5] or [∞] to adjust the level.

OR

To adjust bass or treble using the main unit.

Turn [BASS] or [TREBLE] clockwise to increase the level.

Turn [BASS] or [TREBLE] counter-clockwise to decrease the level.

Note

The tone level can be varied within -3 to +3.

RQTV0102_2B.indd 12 2/9/07 11:14:34 AM