Panasonic SC-PT770 Setting up the radio (continued), FM frequency step

Setting up the radio (continued)

Getting Started

Playing Discs

					Presetting stations manually
					Up to 30 stations can be set in each band, FM and AM.
	1	2	3		1 While listening to the radio broadcast
					Press [OK].
Numbered	4	5	6		2 While the frequency is flashing on the display
					Press the numbered buttons to select a channel.
buttons	7	8	9		≥To select a 2-digit number
					e.g. 12: [S10] B [1] B [2]
		0	10
	SKIP		SKIP	,	Alternatively, press [X, W], and then press [OK].
					Main unit:

1While listening to the radio broadcast

Press [MEMORY] twice.

2While a channel number is flashing on the display Press [X TUNE W], and then press [MEMORY].

OK	OK	A station previously stored is overwritten when another station is stored in
		the same channel preset.

Other Operations

Reference

RQTX0221

MEMORY

SELECTOR TUNE

FM frequency step

Main unit only

The step is factory-set to 0.2-MHz, but you can change it to receive broadcasts allocated in 0.1-MHz steps. You may need to change this setting if the tuner seems to skip over the correct frequency for stations in your area.

1Press [SELECTOR] to select “FM”.

2 Press and hold [SELECTOR].

After a few seconds the display changes to show the current minimum frequency. Continue to hold the button down. The minimum frequency changes and the step is changed.

e.g. 87.9 (Factory preset) ,# 87.5

To return to the original step, repeat steps 1 and 2.

[Note]

After changing the setting, previously preset frequencies will be cleared. Preset them again.

14