Adjusting the speaker output level manually

Preparation

≥To display the picture, turn on the TV and select the appropriate video input mode.

≥Press [i, ` VOL] to adjust the volume to normal listening level.

≥Select “TEST TONE” from “SPEAKER SETTINGS” in AUDIO menu (B 29).

Started

1

OK

2

OK

Enter test tone mode.

e.g. AUDIO-SPEAKER SETTINGS-TEST TONE

SPEAKER

 

TRIM LEVEL

LEFT

 

 

− −

 

CENTER

 

 

0dB

 

RIGHT

 

 

− −

 

SURROUND RIGHT

 

 

0dB

 

SURROUND LEFT

 

 

0dB

 

SET

 

 

 

 

RETURN

 

EXIT : SETUP

Test tone will be output to each channel in the following order.

LEFT, CENTER, RIGHT,

SURROUND RIGHT, SURROUND LEFT

Adjust the speaker level for each speaker. (CENTER, SURROUND RIGHT, SURROUND LEFT)

`6 dB to i6 dB (Factory preset: 0 dB)

≥To exit the screen, press [SETUP].

Getting

To adjust speaker level during play

(Effective when playing 5.1-channel sound or when “ÎPLII” lights.)

1Press and hold [—CH SELECT] to select the speaker. While the speaker channel is displayed, press [—CH SELECT].

L# C# R# RS# LS# SW

^----------------------------------------------}

≥You can adjust SW (Subwoofer) only if the disc includes a subwoofer channel and “ÎPLII” is not lit.

≥“S” appears on the main unit’s display when you have selected “S.SRND” (B 16, Enjoying surround sound effects). In this case, you can adjust both surround speaker levels at the same time using [3, 4].

S: `6 dB to i6 dB

2Press [3] (increase) or [4] (decrease) to adjust the speaker level for each speaker.

C, RS, LS, SW: `6 dB to i6 dB

(L, R: Only the balance is adjustable.)

To adjust the balance of the front speakers, while “L” or “R” is selected, press [2, 1].

RQTX0221

17