remote control

Simple Setup

remote control

step3step3 AC cord connection AC cord connection

To household AC outlet (AC 120 V, 60 Hz)

AC IN

Main unit

 

AC power supply cord (included)

 

 

 

Conserving power

[Note]

The main unit consumes a small amount of power, even when it is in

The included AC power supply cord is for use with the main unit only. Do

standby mode (approx. 0.3 W). To save power when the unit is not to be

not use it with other equipment. Also, do not use cords for other

used for a long time, unplug it from the household AC outlet. You will

equipment with the main unit.

need to reset some memory items after plugging in the main unit.

 

step4step4 Preparing the remote control Preparing the remote control

connection/Preparing the

Batteries

connection/Preparing the Insert so the poles (i and j) match those in the remote control.

∫BatteriesPress in and lift up.

R6/LR6, AA

Do not:

mix old and new batteries.

use different types at the same time.

heat or expose to flame.

take apart or short circuit.

attempt to recharge alkaline or manganese batteries.

use batteries if the covering has been peeled off.

Mishandling of batteries can cause electrolyte leakage which can severely damage the remote control.

Remove the batteries if the remote control is not going to be used for a long period of time. Store in a cool, dark place.

AC cord

RQTX0014

Use

Replace the cover.

Aim at the remote control signal sensor (page 11), avoiding

 

Do not use rechargeable type batteries.

obstacles, at a maximum range of 7 m (23 feet) directly in front of

the unit.

 

8

Page 8
Image 8
Panasonic SC-PTX5 AC cord connection, Preparing the remote control, Batteries, Use, Simple Setup, connection/Preparing the