Changing the player settings
1 Press [DVD]4 to select “DVD/CD”.
2 Press [START]B to show the START menu.
3 Press [3, 4]8 to select “Setup” and press [OK]8.
Item
Setup |
|
| |
Language | Display | : English | |
Video | Audio | : English | |
Audio | Subtitle | : Off | |
DVD Menu | : English | ||
HDMI | |||
|
| ||
Others |
|
| |
Set |
|
| |
RETURN |
| ||
Menu | Current setting | ||
4 Press [3, 4]8 to select menu and press [OK]8.
5 Press [3, 4]8 to select the item and press [OK]8.
6 Press [3, 4]8 to make the settings and press [OK]8.
≥To return to the previous screen, press [RETURN]D.
≥To exit the screen, press [START]B.
≥The settings remain intact, even if you switch the unit to standby.
≥Underlined items are the factory settings in the following menus.
Language menu
Display
Choose the language for the
≥English ≥Français ≥Español
Audio§
Choose the audio language.
≥English ≥French ≥Spanish
Subtitle§
Choose the subtitle language.
≥Auto | ≥English | ≥French | ≥Spanish |
≥Off |
|
|
|
DVD Menu§
Choose the language for disc menus.
≥English | ≥French | ≥Spanish |
§Some discs start in a certain language despite any changes you make here.
When the selected language is not available on the disc, the default language is played. There are discs where you can only switch the language from the menu screen (B 12).
Video menu
TV Aspect
Choose the setting to suit your TV.
≥16:9: Widescreen TV (16:9)
≥4:3 Pan&Scan: Regular aspect TV (4:3)
The sides of the widescreen picture are cut off so it fills the screen (unless prohibited by the disc).
≥4:3 Letterbox: Regular aspect TV (4:3)
Widescreen picture is shown in the letterbox style.
RQTX1326
Time Delay
When connected with a Plasma display, adjust if you notice the audio is out of sync with the video.
≥0ms/Auto | ≥20ms | ≥40ms | ≥60ms |
≥80ms | ≥100ms |
|
|
When using VIERA Link “HDAVI Control” with “HDAVI Control 3 or later” compatible TV (B 14), select “0ms/Auto”.
Audio and video will automatically be set in sync.
Video Resolution
This works only when the HDMI connection is being used. Select the suitable picture quality for your TV.
(Video recordings will be converted to, and output as,
≥Auto | ≥480i | ≥480p | ≥720p |
≥1080i | ≥1080p |
|
|
Ensure that your TV can support the resolution that you choose.
If a message screen appears, confirm your selection by pressing
[2, 1]8 to select “Yes” and press [OK]8. If the picture is distorted, wait for 15 seconds or press [2, 1]8 to select “No”. To accept the setting, select “Yes” again.
HD JPEG Mode [JPEG]
(This works only when using HDMI connection with “Video Resolution” (B above) set to “Auto”, “720p”, “1080i” or “1080p”.)
≥On: HD JPEG playback is available. (JPEG images will be displayed in original resolution.)
≥Off
During HD JPEG playback, there will be no
Black Level
Change the black level of the picture.
≥Lighter
≥Darker
Audio menu
Select to suit the type of equipment you connected to the HDMI AV OUT terminal.
Select “Bitstream” when the equipment can decode the bitstream (digital form of
(If the bitstream is output to the equipment without a decoder, high levels of noise can be output and may damage your speakers and hearing.)
Digital Output
≥Bitstream | ≥PCM |
When audio output is from HDMI AV OUT terminal, and the connected equipment does not support the item selected, the actual output will depend on the performance of this connected equipment.
Dynamic Range
≥On: Adjusts for clarity even when the volume is low. Convenient for late night viewing. (Only works with Dolby Digital)
≥Off: The full dynamic range of the signal is reproduced.
16